Книга представляет собой подробное справочное руководство по основам плазменной
химико-термической обработки поверхности стальных деталей. В ней обобщены …

An Emerging Tool for Pioneering Engineers Co-published by the International Federation of
Heat Treatment and Surface Engineering. Thermal processing is a highly precise science …

The 35CrMo alloy steel was nitrocarburized and post-oxidized in salt bath and the 109
cycles fatigue tests were carried out. The results show that for the untreated specimens all …

Several surface modification technologies are typically applied to improve the mechanical
properties of the material surface of structural components subjected to severe conditions of …

Due to the mechanical and inertness properties of the ε‐Fe2‐3N phase, its formation as a
compact monolayer is most wanted in plasma surface treatments of steels. This phase can …

AISI 1020 steel was plasma nitrocarburized at different gas mixtures (N2 and H2), for various
times (1, 2, 4, 8 and 12 h) and at elevated temperatures (500, 570 and 640° C). The …

Purpose–The purpose of this study is to select a proper surface treatment to enhance wear
resistance of engine camshafts. The camshaft is a relevant part of a diesel engine which …

Forged low-carbon alloy Co–27% Cr–6% Mo–0.06% C is studied after 2-h plasma
nitrocarburizing in a gaseous mixture of 10% CO 2+ 20% N 2+ 70% H 2 at 400, 500 and …

Austenitic stainless steels are widely used in several industries such as chemistry, food,
health and space due to their perfect corrosion resistance. However, in addition to corrosion …

A set of H13 steels were nitrocarburized with the aim of improving their performance as
matrices and pins. The nitrocraburizing process was performed in an ETSA liquid salt bath …