Sawing is the most common machining process and is present in both primary and
secondary wood transformation sectors. The objective of this paper is to review how it is …

Abstract In this study, 2 5 (five factors at two-level factorial design) design of experiment was
applied to investigate a set of optimal machining parameters to achieve a minimum surface …

The mixtures including crushed recycled aggregates have multiple complex
aggregate/paste interphase regions compared to conventional concrete mixtures, which …

Detection of crack in concrete is an important issue as concrete is one of the principal
material used in civil infrastructures. Cracks often occur first on the surface of concrete …

This study was carried out to determine the planing properties and surface roughness of
naturally grown Oriental beech (Fagus orientalis Lipsky.), Anatolian chestnut (Castenea …

Objective of this study is to determine the parameters such as spindle speed, feed rate and
wood material on surface quality. Medium density fiberboard (MDF), Beech (Fagus orientalis …

Effective properties and structural performance of cementitious mixtures are substantially
governed by the quality of the interphase region because it acts as a bridge transferring …

The effects of wood temperature, cutting width, and knots on the surface quality of black
spruce cants processed by a chipper-canter were evaluated. Four matched groups of logs …

In this paper, the optimization of CNC machining parameters was conducted using the
Taguchi design method on the surface quality of massive wooden edge glued panels made …

The effect of short-term thermomechanical densification of veneer on the surface roughness
and surface anatomical changes in four wood species–alder (Alnus glutinosa Gaertn.) …