The present article reviews the development of cast aluminium alloy with highlights on
improvement in the morphological, mechanical, tribological, and ageing properties of Sr …

The shape and size of primary phases (α-Al and primary Si in hypoeutectic and
hypereutectic alloys, respectively), and that of eutectic Si phase significantly affect the …

A superior anti Si-poisoning Al-Ti-Nb-B refiner with Ti: Nb= 1: 4 and M: B= 8: 1 (M= Ti, Nb)
was developed by a comprehensive data screening on the Al-10Si/Al-Ti-Nb-B system with …

A mechanism describing the synergistic effect of ultrasonic melt treatment (UST) and
subsequent fast cooling on the refinement of primary Si particles in a hypereutectic Al− Si …

The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions
of different cooling rates were investigated using solidification curves, scanning electron …

Abstract A hypoeutectic Al–10Si-2.0 Mg ternary alloy with high strength and high ductility
was developed for as-cast service conditions. The effects of eutectic-forming element Mg on …

Even small amounts of Phosphorus and Strontium strongly affect the microstructure of
hypoeutectic Al–Si alloys. P is an unavoidable trace element in commercial Al-alloys which …

Using published experimental phase equilibria, a self-consistent thermodynamic database
of the Al-Si-Mg-Sc quaternary system in Al-rich corner was established by application of the …

AlP has been widely used as an effective heterogenous nucleus for primary Si phase in
hypereutectic Al-Si alloys, but the morphological correlation between AlP and primary Si is …

The solidification diagrams of A357-Sc, A360-Sc and A380-Sc were constructed on the
basis of the Scheil-Gulliver solidification simulations and previously well-established …