Solid oxide cell (SOC) is an important technology for hydrogen energy utilization. Durability
and reliability of metal components including interconnect and metal support of metal …

The present work aims to investigate the long-term stability of Ce/Co coated AISI 441 used
as an interconnect material in solid oxide fuel cells (SOFC). Being a commercially available …

This review covers developments in the analysis of chemicals, metals and functional
materials. We have strengthened the criticality of this review and have included only those …

Less mass gain and poorer scale adhesion assessed by the tensile test of the AISI 430
stainless steel exposed to O 2-40% H 2 O at 800° C were observed in comparison with the …

Abstract Fe–15.7 wt.% Cr–8.5 wt.% Mn was oxidised in O 2 and O 2–9 vol.% H 2 O at 700°
C. Oxide scales in both atmospheres consisted of M 2 O 3 and M 3 O 4 where M could be …

The high-temperature oxidation of NiAl is studied with dry oxygen and water vapor. The
oxidation in H 2 O results in a thicker Al 2 O 3 oxide scale than that in O 2. The oxide scale …

The demonstration of relevant lifetimes for solid oxide electrolysis stacks is an underlying
necessity to the rapidly industrializing technology. Following a 6.7 kh test of a 25-cell stack …

The as-rolled K41X (AISI 441) ferritic stainless steel presents unusual behaviour when
exposed in H 2–H 2 O atmosphere at 800° C, with growth of non-protective iron oxides at its …

Water vapor is ubiquitously present for energy conversion and combustion systems, yet its
effect on the oxidation of crucial structure components of heat-resistant alloys remains …

Aluminide coatings are deposited on K452 alloy by chemical vapor deposition (CVD)
method at 850, 950 and 1050° C, respectively. All coatings consist of a β-NiAl layer and an …