This article presents an overview of the developments in stainless steels made since the
1990s. Some of the new applications that involve the use of stainless steel are also …

Since gas turbines are used in airplanes, ship engines and power plants, they play a
significant role in providing sustainable energy. Turbines are designed for a certain lifetime …

Environmental spills of in-water hull cleaning wastewater (HCW) containing heavy metals
and biocides is inevitable, and the effects of HCW on microalgae are unknown. To …

Bronze–graphite composites containing 8.4∼ 15wt% of Ni-coated graphite were fabricated
by P/M method. The tribological properties were investigated under sea water condition. The …

Fretting wear behavior of CuNiAl against 42CrMo4 was investigated under different
lubrication conditions with the flat on flat contact configuration. In oil, filtered water and …

In order to investigate the influence of characteristic parameters of pits on the strength and
stress concentration factor of cable steel wire, 198 cable steel wires with pits were manually …

Bronze–SiC–nickel coated graphite composites were fabricated by powder metallurgy
technique (P/M). The tribological properties of composites sliding against AISI321 stainless …

The effect of tensile overload on fatigue crack behaviors of 2205 duplex stainless steel has
been studied by experimental and finite element methods (FEM). The residual stresses were …

Corrosion fatigue is one of the main failure mechanisms of components working in corrosive
environments. As a result, the assessment of this phenomenon and taking it into account is …

Bronze matrix composites were prepared by the powder metallurgy technology (P/M). The
tribological properties of composites sliding against AISI321 stainless steel pins were …