The development of alloys suitable for engine bearings demands not only reducing the
amount of wear as well as increasing the load carrying capability due to both engines …

In this study, laser-arc hybrid welding of 5A06 aluminum alloys was performed firstly. To
improve the surface quality of welded joints, ultrasonic peening (UP) process was employed …

Abstract Nb, V and Nb-V carbide layers were produced by means of the diffusion thermo-
reactive treatment (TRD) in a vermicular cast iron, in baths composed of sodium borate …

In this study, the tribological properties of an AlSi10Mg alloy that was fabricated using laser
powder bed fusion, an additive manufacturing technique, was investigated in both the as …

Zn-Mg alloys are considered to have potential application in bone implants, since both
metals are biocompatible and have biodegradable characteristics. Adding Mg to Zn can …

The effect of Zn addition on the as-cast microstructures, mechanical properties and dry
sliding wear behavior of Al-2wt% Mg-Zn alloys is investigated in this study. Two Al-Zn-Mg …

Abstract The Cu-24Pb-xSn (wt%)(x= 0, 2, 4, 6) alloys with Pb-rich second-phase particles
(SPPs) in different shapes show obviously differently mechanical and self-lubricating …

The present work aims to investigate the microstructure evolution along the length of a
directionally solidified Al–8wt.% Ni hypereutectic alloy with a view to tailoring the range of …

In the present study, the Cu-24Pb-xSn (wt.%) alloys with Pb-rich secondary phase particles
(SPPs) in different morphology were prepared by intermediate frequency induction heating …

Abstract Directional solidification of Zn-0.63 at% Bi monotectic alloys at different growth rates
with and without a 5-T high static magnetic field (HSMF) was studied. Regardless of whether …