Progressive efforts on lowering working temperature of Solid Oxide Fuel Cell (SOFC) to
approximately 600° C enable application of stainless steel as interconnector instead of …

Chromium (Cr) species vaporizing from chromia-forming alloy interconnects is known as a
source of degradation in solid oxide fuel cell (SOFC) stacks called “cathode poisoning”.(Mn …

Abstract The Fe/Mn-modified Mn–Co spinel oxides (MCO) are coated on SUS430
interconnect to protect against oxidation and chromium diffusion by wet spray followed by …

The effect of de-siliconization on the oxidation behavior of AISI 430 stainless steel used for
solid oxide fuel cell interconnect application was investigated. De-siliconization treatment …

The CoMn 2 O 4 coating can effectively protect the metallic interconnect of solid oxide fuel
cells, which come into direct contact with the naturally occurring Cr 2 O 3 on the matrix …

The present research used the DC electrodeposition method to apply an Mn–Co–ZrO2
composite coating on the steel interconnect plates of solid oxide fuel cells. The surface …

In this study, a solid oxide fuel cell (SOFC) stack has been successfully fabricated and tested
by using direct natural gas. The main objective of this research was to achieve optimal long …

Reduction of operating temperature to the range of 600-800 ̊C allows metallic alloys to be
considered as solid oxide fuel cells (SOFCs) interconnects. Of all SOFC components …

Doping rare transition metals into Mn-Co spinel oxide (MCO) could improve conductivity and
bonding of coated interconnects applied for solid oxide fuel cells. In the present study, Cux …

با افزودن عناصر واسطه به اکسید اسپینل منگنز-کبالت (MCO) می‌توان هدایت الکتریکی دمای
بالا و چسبندگی پوشش‌های محافظ بر روی اتصال‌دهنده‌های پیل سوختی اکسید جامد را بهبود بخشید …‎