Various methods exist to improve the toughness and reduce the sensitivity to the defects in
ceramic materials; however, the bionic laminated ceramics are the most promising ones. In …

Spray drying, binder jetting and chemical vapor infiltration (CVI) were used in combination
for the first time to fabricate SiC whisker-reinforced SiC ceramic matrix composites (SiC …

Abstract SiC whisker (SiCw)‐reinforced SiC composites were prepared by an oscillatory
pressure sintering (OPS) process, and the effects of SiCw content on the microstructure and …

A promising technique to develop polymer matrix composites by reinforcing carbon
nanoparticles/whiskers through an extrusion process is described. Linear low density …

SiC w/3D-SiC composites were fabricated by chemical vapor infiltration (CVI) of the 3D SiC
lattices, which were prepared via direct ink writing of polycarbosilane-based suspensions …

Laminated SiCw/SiC ceramic composites were prepared by chemical vapor infiltration (CVI)
and tape casting, and the advantages of this method were investigated. The results showed …

Functionally graded Y2O3 stabilized ZrO2 (YSZ)/NiCoCrAlY composite coatings were
prepared using pre-alloyed and spheroidized composite powders. During the preparation of …

Mechanical alloying and spark plasma sintering (SPS) were used to prepare dense SiAlCN
ceramic and SiAlCN ceramic toughened by SiC whiskers (SiC w) or graphene nanoplatelets …

Silicon carbide (SiC) whisker reinforced SiC ceramic matrix composites were prepared by
chemical vapor infiltration. Microstructure and mechanical properties of the composites were …

The Si 3 N 4 coating and Si 3 N 4 coating with Si 3 N 4 whiskers as reinforcement (Si 3 N 4w-
Si 3 N 4) were prepared by chemical vapor deposition (CVD) on two-dimensional silicon …