The effect of lap splice length on the cyclic lateral load behavior of RC members with low-strength concrete and plain bars

C Goksu, H Yilmaz, SR Chowdhury… - Advances in …, 2014 - journals.sagepub.com
Many existing reinforced concrete buildings in developing countries located in seismic areas
do not possess sufficient strength and ductility characteristics to resist the effects of severe …

[HTML][HTML] Flexural behaviour and ductility of high strength concrete (HSC) beams with tension lap splice

MI Mousa - Alexandria Engineering Journal, 2015 - Elsevier
An experimental program has been conducted in order to investigate the flexural behaviour
of concrete beams with variable length of tension reinforcement lap splice. A test series of …

Local behavior of lap-spliced deformed rebars in reinforced concrete beams

ASM Gillani, SG Lee, SH Lee, H Lee, KJ Hong - Materials, 2021 - mdpi.com
Twelve full-scale reinforced concrete beams with two tension lap splices were constructed
and tested under a four-point loading test. Half of these beams had shorter lap splices than …

Bond properties of deformed steel bars coated with quartz sand modified enamel in concrete under both monotonic and reversed cyclic loading

Y Kuang, F Tang, E Verstrynge - Engineering Structures, 2024 - Elsevier
Reinforced concrete structures located in seismic zones require significant ductility, which is
affected by the bond properties between steel and concrete. The bond may be negatively …

Corrosion initiation and its effect on bond characteristics and service life of reinforced concrete systems with Cement-Polymer-Composite coated steel rebars

DK Kamde, RG Pillai - Structures, 2022 - Elsevier
This paper investigates the corrosion and bond characteristics of steel reinforcement with
Cement-Polymer-Composite (CPC) coating, which is widely used worldwide to prolong the …

Experimental investigation for splice strength of deformed steel bars in normal-, medium-and high-strength recycled aggregate concrete

G Gaurav, B Singh - Construction and Building Materials, 2021 - Elsevier
Experimental investigation has been carried out to calculate the splice strength in bond of
deformed steel bars in recycled aggregate concrete (RAC) using 132 singly reinforced …

Phase structure and corrosion resistance of multilayer low-temperature sintered chemically reactive enamel coatings

D Yan, Z Xu, H Qian, F Tang, Y Liu… - Journal of Materials in …, 2020 - ascelibrary.org
The phase structure and corrosion resistance of uncoated, pure enamel-, double-enamel-
and triple-enamel-coated hot-rolled plain steel bars were investigated by X-ray diffraction …

Bond strength prediction of tension lap splice for deformed steel bars in recycled aggregate concrete

G Gaurav, B Singh - Materials and Structures, 2017 - Springer
Splice strength of deformed steel bars embedded in recycled aggregate concrete was
experimentally investigated using 48 bottom-cast scaled splice beam specimens detailed …

Experimental investigation on the bond-slip behavior of rebars coated with epoxy and polyurethane systems: A comparative study

RK Vanama, B Ramakrishnan - Journal of Building Engineering, 2024 - Elsevier
This study presents a comprehensive experimental investigation into the effectiveness of
various rebar coating systems in mitigating corrosion and maintaining bond strength with …

Splice strength of deformed steel bars embedded in recycled aggregate concrete

MJR Prince, G Gaurav, B Singh - Structures, 2017 - Elsevier
Splice strength of deformed steel bars embedded in recycled aggregate concrete was
experimentally investigated using 24 bottom-cast scaled splice beam specimens detailed …