This study investigated the plastic deformation behavior of a polycrystalline L1 2-structured
FeCoNiV high-entropy alloy (HEA) using in situ electron backscatter diffraction (EBSD) and …

The addition of rare earth (RE) elements in magnesium alloys may significantly enhance the
ductility of magnesium alloys, which is generally attributed to the decrease of stacking fault …

In this study, an in situ SEM/EBSD study on slip-induced extension twinning (S→ T)
behaviors of a Mg–Y alloy was conducted. It shows that the S→ T process cannot be well …

Abstract {10 1¯ 2} twins were introduced into the magnesium (Mg) plate AZ31 via pre-rolling
along its transverse direction. The plates, both with and without the pre-induced {10 1¯ 2} …

Twinning is an important plastic deformation mode for zirconium (Zr) and its alloys. In this
work, pre-compression followed by orthogonal re-compression, was performed to …

In this paper, the microstructure and twinning behavior of tantalum (Ta) during dynamic
plastic deformation (DPD) were jointly analyzed in combination with impact experiments and …

Layered materials are of great interest in aerospace and automotive engineering fields due
to their superior performance. In the present work, Zr/Ti layered materials were fabricated by …

The macroscopic Schmid's law and microscopic local strain accommodation mechanism
have been widely used to determine the twin variants selection combinedly. In the present …

The formation mechanism of {11 2‾ 1}< 1‾ 1‾ 26> twins (TT2), primary paired {10 1‾ 2}< 1‾
011> twins (TT1) and secondary twins in Zircaloy-4 alloy with coarse lamellae was studied …

Specimens of recrystallized Zircaloy-4 were deformed in compression at~ 1200 s− 1 and 25°
C using the split-Hopkinson pressure bar. The deformation was carried along the specimen …