A growing understanding of wear behavior of various thermally sprayed ceramic–metallic
matrix coatings has occurred over recent years. This has resulted from the continuous …

Thermal barrier coatings (TBCs) are commonly employed as thermal protection systems in
harsh environments and are comprised of a ceramic top coat and a metallic bond coat. The …

Thermally sprayed hardmetal coatings are widely used to protect components and surfaces
against wear in various applications. Hard and wear resistant coatings increase the …

Material and spray process selection are the key factors in the tailoring of thermal sprayed
coatings for demanding industrial applications. In this study, four commercial Cr 3 C 2-based …

In this study, effect of feedstock particle size and nozzle configuration on deposition,
microstructural features, hardness and sliding wear behaviour of high velocity air fuel …

The current industry demand is to identify suitable alternatives to the risk-of-supply prone
and/or toxic, WC-Co and electrolytic hard chrome coatings without comprising the desired …

Abstract WC-Cr 3 C 2–Ni coating was deposited on SK5 steel substrate by high velocity air
fuel (HVAF) spraying. The effect of vacuum heat treatment temperature on the phase …

In this study, Cr 3 C 2-NiCr coatings of two different particle sizes (fine: 10–30 and coarse:
15–45 μm) were deposited by variable nozzle lengths (long, medium and short) and profiles …

Abstract Thermal sprayed Cr 3 C 2-NiCr coatings are widely used to protect industrial
components from ambient or elevated erosive degradation. Various thermal spraying …

Thermal spray processes have been developing toward lower particle temperature and
higher velocity. Latest generation high-velocity oxygen-fuel (HVOF) and high-velocity air-fuel …