A method is presented to characterize the fracture resistance and interlayer adhesion of
fused deposition modeling (FDM) 3D printed materials. Double cantilever beam (DCB) …

This study aims to establish the relationships between the process parameters,
mesostructural features (interlayer neck and void sizes), and the fracture resistance of 3D …

Objective This study evaluated the influence of silicon dioxide (SiO 2) nanoparticles on the
flexural strength of heat-polymerized denture base materials. Background Nanoparticles …

Statement of problem Poly (methyl-methacrylate)(PMMA) represents the most popular
current denture material. However, its major drawbacks are insufficient ductility and strength …

Surface hydrophilic modified acrylonitrile-butadiene-styrene (ABS) terpolymer was prepared
by melt blending with poly (ethylene glycol-co-1, 4-cyclohexanedimethanol …

The impact fracture toughness of acrylonitrile-styrene-butadiene/polyamide-6 (ABS/PA6)
blends compatibilized with 5% by weight carbon monoxide modified ethylene-n butyl …

In this study, acrylonitrile-butadiene-styrene (ABS) blends were prepared by blending
polybutadiene-grafted styrene-acrylonitrile (PB-g-SAN) and SAN resins. The effects of PB-g …

Binary blends of poly (methyl methacrylate)(PMMA)/copoly (ether‐ester)(COPE) elastomer
were prepared under four different compositions by melt mixing technique using twin‐screw …

ABSTRACT Acrylonitrile–butadiene–styrene (ABS) shows excellent impact resistance and
good stiffness. The incorporation of thermoplastic elastomer into ABS may consist in an …

The recycled polymeric constituents have a huge potential to be reformed into new products.
However, due to the lower toughness of the recycled plastic blends limits it from the further …