Evolution of the laser-induced spallation technique in film adhesion measurement
Laser-induced spallation is a process in which a stress wave generated from a rapid, high-
energy laser pulse initiates the ejection of surface material opposite the surface of laser …
energy laser pulse initiates the ejection of surface material opposite the surface of laser …
Advances in test and measurement of the interface adhesion and bond strengths in coating-substrate systems, emphasising blister and bulk techniques
X Chen, C Shaw, L Gelman, KTV Grattan - Measurement, 2019 - Elsevier
In this paper, recent advances in the minimum-destructive testing of the adhesion of coating-
substrate systems are reviewed, focusing on key techniques such as micro-and nano-scale …
substrate systems are reviewed, focusing on key techniques such as micro-and nano-scale …
Shockwave loading of mechanochemically active polymer coatings
Thin films of mechanochemically active polymer were subjected to laser-generated, high
amplitude acoustic pulses. Stress wave propagation through the film produced large …
amplitude acoustic pulses. Stress wave propagation through the film produced large …
涂层/基体材料界面结合强度测量方法的现状与展望
杨班权， 陈光南， 张坤， 罗耕星 - 力学进展, 2007 - lxjz.cstam.org.cn
界面结合强度是涂层/基体材料体系中的一项重要力学性能指标. 而表征与评价涂层/基体材料的
界面结合强度又得依靠实验方法的测定. 由于涂层/基体材料体系的多样性与复杂性 …
界面结合强度又得依靠实验方法的测定. 由于涂层/基体材料体系的多样性与复杂性 …
In-operando spectroscopic interrogation of macromolecular conformational changes in polyurea elastomers under high strain rate loading
Temporary and permanent macromolecular conformational changes can accompany the
deformation of elastomers under high strain rate loading. Mechanical failure can occur as …
deformation of elastomers under high strain rate loading. Mechanical failure can occur as …
Development of LaSAT and bonding strength evaluation of epoxy adhesive over a wide range of loading rates
A Takagi, Y Kimoto, A Shinozaki, H Yamada… - The Journal of …, 2024 - Taylor & Francis
This study improved laser shock-wave adhesion test (LaSAT) to evaluate the bonding
strength of an aluminum alloy/epoxy resin adhesive, since the bonding strength is …
strength of an aluminum alloy/epoxy resin adhesive, since the bonding strength is …
AFM nanotribomechanical characterization of thin films for MEMS applications
Nanotribological studies of thin films are needed to develop a fundamental understanding of
the phenomena that occur to the interface surfaces that come in contact at the micro and …
the phenomena that occur to the interface surfaces that come in contact at the micro and …
A theoretical analysis for arbitrary residual stress of thin film/substrate system with nonnegligible film thickness
K Sun, C Sun, J Chen - Journal of Applied …, 2024 - asmedigitalcollection.asme.org
Stoney formula is widely used in advanced devices to estimate the residual stress of thin
film/substrate system by measuring surface curvature. Many hypotheses including that thin …
film/substrate system by measuring surface curvature. Many hypotheses including that thin …
Quantitative evaluation of adhesion quality of surface coating by using pulse laser-induced ultrasonic waves
This study aims to evaluate delamination characteristics of surface coating by using strong
ultrasonic wave induced by pulsed laser irradiation. Strong tensile stress wave is induced by …
ultrasonic wave induced by pulsed laser irradiation. Strong tensile stress wave is induced by …
Adhesion strength measurement of polymer dielectric interfaces using laser spallation technique
A laser-induced spallation technique is employed to obtain the critical interface strength of
the poly-p-phenylenebenzobisoxazole (PBO) polymer and silicon nitride (SixNy) interface in …
the poly-p-phenylenebenzobisoxazole (PBO) polymer and silicon nitride (SixNy) interface in …