The last few years have seen a rise in the interest in early transition-metal and rare-earth
nitrides, primarily based on ScN and CrN, for energy harvesting by thermoelectricity and …

Nitride based hard coatings are widely used for mechanical applications. Among these
coatings, chromium nitrides are especially interesting because they combine good …

CrN layers, 0.5 μm thick, were grown on MgO (001) at T s= 570–775° C by ultrahigh vacuum
magnetically unbalanced magnetron sputter deposition in pure N 2 discharges at 20 mTorr …

Abstract Binary (Ti/TiN and Cr/CrN) and ternary (TiCr/TiCrN) thin films were deposited on
AL7075-T6 by magnetron sputtering. Microhardness, adhesion strength and pin-on-plate …

Chromium–chromium nitride multi-coating barriers were synthesized on HT9 steel disks
using the electroplating and radiofrequency (RF) plasma nitriding techniques, respectively …

Chromium nitride coatings are known to give reasonable solutions to the requirements of
semisolid forming tools and of pressure die-casting of low-melting-point metals and alloys …

The nitrided layer on Ni 45 (CoCrFe) 40 (AlTi) 15 high-entropy alloys (HEAs) was prepared
by plasma nitriding. The microstructure, hardness, the effect of temperature on the …

In this paper tribological and corrosion behavior of CrN coatings obtained through
magnetron sputtering (MS) and cathodic arc evaporation (CAE) deposition techniques were …

Cr/CrN nano-multilayers were grown on H13 steel and silicon (100), having different periods
(Λ), at room temperature using the unbalanced magnetron sputtering technique by varying …

A series of monolithic and multilayer coatings of chromium nitride with various compositions
and architectures were deposited at low temperatures (< 200° C) on silicon substrates using …