This review article presents an overview of the dissimilar welded joint's microstructure and
mechanical behavior. Dissimilar metal weldings are generally employed in high-pressure …

This article attempts to compile a list of recent tungsten inert gas welding advancements
(TIG). TIG welding only allows for a few millimeters of penetration depth. This limitation of …

In this paper, the Electron Beam Welding (EBW) was used to join thin plates of low-nickel
nitrogen-strengthened austenitic stainless steel (LNiASS), a material valued for its superior …

Abstract Stress Corrosion Cracking behavior of Austenitic Stainless Steels (SS) in a chloride
environment has been investigated by several methods. In this investigation failure of …

The article presents the results of research on the structural evolution of the composite Fe-Al-
based coating deposited by arc spray with initial low participation of in situ intermetallic …

Electron beam welding was used to fabricate a fully penetrated joint of 18 mm thick AISI 316
stainless steel plates. The effects of carbide precipitation on the metallurgical and …

This paper investigates the material properties and free vibration characteristics of Stainless
Steel (SS) 304 joints reinforced with Al 2 O 3 microparticles fabricated by tungsten inert gas …

Filler-free (FF) welding processes namely, Activated Tungsten Inert Gas welding (ATIG),
Laser Beam Welding (LBW), and Friction Stir Welding (FSW) were utilized for joining the …

A Zr–Gd alloy with neutron poisoning properties and resistance to boiling concentrated
HNO3 corrosion was developed based on a corrosion-resistant Zr-702 alloy to meet the …

The activated flux tungsten inert gas welding process is an attractive joining technique to
increase the depth of penetration in a single pass. In the last two decades, the research on …