Ti-6Al-4V alloy strengthening via instantaneous phase transformation induced by electropulsing

X Xu, X Yan, Y Qian, X Chong, Y Zhou, Y Zhao… - Journal of Alloys and …, 2022 - Elsevier
High-strength titanium alloys are necessary and essential in aviation and aerospace fields.
Attempt to enhance the strength of the most widely used Ti-6Al-4V alloy is significant …

Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel

D Bhuyan, GVS Sastry, S Patra, SK Pradhan… - Materials …, 2023 - Elsevier
The study investigates the microstructure and crystallographic orientation relationship in a
high carbon nanostructured bainitic steel that is austempered at 250° C for different …

Another reason for plasticity enhancement of cold-deformed aluminium alloy induced by electric pulse treatment

C Liao, J Huang, L Xue, M Wu, G Yang… - Materials Today …, 2023 - Elsevier
The plasticity improvement of cold-deformed metal by electric pulse treatment (EPT) is
generally attributed to the promotion of recovery or recrystallization. This paper found that …

Micromechanical analysis of a unimodal and a bimodal polycrystal with paired microstructures of ultrafine grains, 2D & 3D

M Calvat, C Keller, F Barbe - European Journal of Mechanics-A/Solids, 2025 - Elsevier
Both experimental and numerical evidence supports that blending grains of different sizes
within a polycrystalline materials allows to increase the alloy strength while maintaining its …

Electropulsing of low-density duplex steel for strengthening and ductilization by microstructural refinement

RP Kumar, NCS Srinivas, RK Pandey… - Journal of Materials …, 2024 - Elsevier
The present investigation finds the effect of electropulsing treatment on the mechanisms of
refining and reprecipitation of ordered L2 0 structure (B2) and its impact on tensile properties …

Effect of Electropulsing on Nanostructured Bainitic Steel

M Agrawal, D Bhuyan, RK Pandey, A Sharma… - Journal of Materials …, 2022 - Springer
Abstract Novel steel of Fe-0.81 C-1.9 Mn-1.48 Si-0.27 Mo-0.95 Ni-1.43 Co-0.79 Al
composition was austenitized at 930° C and isothermally treated at 240° C for different …