Cold spray is an effective solid-state process for the fabrication of metal matrix composites
where metallic, ceramic, or intermetallic reinforcements are embedded in a metallic matrix …

Metal matrix nanocomposites (MMNCs) become irreplaceable in tribology industries, due to
their supreme mechanical properties and satisfactory tribological behavior. However, due to …

Abstract Monodisperse Cu nanoparticles@ MoS 2 nanosheets were prepared via a facile in-
situ reduction method. The anchored Cu nanoparticles with average diameters of 8–13 nm …

Abstract Pure Cu and Cu composite coatings with Al 2 O 3, SiC, or WC were used to explore
the influence of different ceramic phases on the wear resistance and thermal conductivity of …

The paper investigates the cavitation erosion (CE) and sliding wear (SW) resistance of cold-
sprayed Al/Al2O3 and Cu/Al2O3 composites and studies them in relation to a set of metallic …

Cold spray technology, as an emerging surface engineering technique, effectively prepares
hard coatings by high-speed projection of powder materials onto substrates at relatively low …

The effects of MoS 2 content on microstructure, density, hardness and wear resistance of
pure copper were studied. Copper-based composites containing 0–10%(mass fraction) MoS …

The dry sliding friction and wear behavior of Cu-MoS 2 composite pins against bearing steel
(AISI 52100) discs were investigated in order to determine the optimal additive content. The …

In this twenty first century, Copper has been widely utilized in aerospace, biomedical and
automobile application rapidly due to its significant implementable benefits. Copper based …

Tribochemical reactions in many applications determine the performance and lifetime of
individual parts or entire engineering systems. The underlying processes are however not …