The deformation mechanisms associated with uniaxial tensile testing are studied by
conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy …

In the present investigation, the effect of microstructure and texture on the evolution of
mechanical properties during recrystallization for 80% unidirectionally cold rolled UNS …

The present study describes the hot deformation behaviour of a novel Ti–6Al–4Mo–1V–0.1
Si alloy. The flow characteristics of the alloy were investigated in the strain rate range of 0.01 …

The present study deals with the extraordinary twin formation during compressive
deformation of a Fe-37.55 Mn-8.5 Al-0.6 C (wt.%) low-density steel at warm temperature …

In the present investigation, hot deformation behaviour of Fe–21Cr-1.5 Ni–5Mn alloy was
studied by performing isothermal unidirectional hot compression tests. The tests were …

This paper presents a systematic experimental study to clarify the relationship between the
hot deformation conditions and microstructure evolution and flow stress of the individual …

A series of thermal compression tests on a Cr-Mn-Si-Ni alloyed naval steel were carried out
at different strain rates (0.0005–0.0100 s− 1) at different temperatures (1023–1173 K) …

Ce addition in Mg improves its restricted ductility owing to inadequate number of
deformation systems being hcp structure. Hot compression conducted on Mg-0.5 wt% Ce …

To obtain the flow stress in duplex stainless steel, a duplex flow model is proposed that
applies a rule of mixtures with the relationship between the volume fractions of austenite and …

The development of ultrahigh-strength steels with good ductility is crucial for improving the
crashworthiness of automobiles. In the present work, the mechanical responses and …