The purpose of the present contribution is to review the current knowledge about the
relationship between the micro-structure of cold rolled intercritically annealed low alloy TRIP …

Steel with an ultimate tensile strength of 2500MPa, a hardness at 600–670HV and
toughness in excess of 30–40MPam1/2 is the result of exciting new developments with …

High-entropy alloys (HEAs) are a newly emerging class of materials that show attractive
mechanical properties for structural applications. Particularly, face-centered cubic (fcc) …

Differently heat treated samples of a low alloyed TRIP steel have been investigated using
electron diffraction techniques in SEM and TEM. Aim was, first, to discriminate the …

In recent years there has been an increased emphasis on the development of new
advanced high strength sheet steels (AHSS), particularly for automotive applications driven …

An alloy system based on iron is described in which it has been possible to create a high
density of interfaces by heat treatment alone. The resulting structure consists of a mixture of …

A fine-scale bainitic microstructure with high strength and high toughness has been
achieved by transforming austenite at 200° C. X-ray diffraction analysis showed the carbon …

A pragmatic shift has been ongoing for the metal development of industrialization for the last
several decades. In various engineering and industrial applications, there is a high demand …

Analysis of published data demonstrates that the start temperatures of bainite (B s) and
martensite (M s) formation exhibit an exponential carbon dependence. Empirical models are …

Novel bainitic microstructures, consisting of slender ferrite plates (tens of nm) in a matrix of
retained austenite, have reported maximum yield strength of 1.4 GPa, ultimate tensile …