The past two decades of research on Carbon Capture and Storage (CCS) seem to have
finally become fruitful as global leaders and energy-intensive industries are cooperating to …

Whatever the supercritical fluid is, the performance of structural materials is a key issue for
industrial applications. An overview is carried out on the corrosion behavior of metallic …

The effect of small amount of H 2 S on the corrosion of carbon steel in both dynamic
supercritical CO 2 and aqueous phase was investigated. H 2 S changed the adsorbability of …

The comparison of corrosion mechanism of X70 steel, as well as the formation mechanism
of scale, at between 9.5 and 1 MPa were studied. The outer FeCO 3 scale formed at 1 MPa …

An important aspect of hydrocarbon drilling is the usage of drilling fluids, which remove drill
cuttings and stabilize the wellbore to provide better filtration. To stabilize these properties …

Carbon capture and storage (CCS) is the most effective way to reduce CO 2 emissions. In
CCS, CO 2 transportation plays an important role for the transmission of CO 2 from the …

Low-Cr alloy steel demonstrates lower corrosion rate than does C steel in a high-
temperature and high-pressure CO 2-containing environment. This study aimed to clarify the …

The CaCO 3 influence on the corrosion properties of low carbon steel in aqueous solutions
saturated with CO 2 and NaCl at 80° C and 15 MPa was investigated over time with respect …

Appropriate materials for injection pipelines and tubing for carbon dioxide geologic storage
is fundamental to ensure asset integrity and save cost. This paper evaluates the corrosion …

The galvanic effect between N80 carbon steel and 13Cr stainless steel in formation water
under supercritical CO 2 conditions was studied by electrochemical measurements and …