Effect of semisolid and heat treatment process on microstructural refinement of Al–7Si alloy
Improving the engineering properties of Al–7Si cast alloys (300 series) provides an attractive
alternative to automotive and aircraft engine industries. The solubility limit of silicon (Si) in Al …
alternative to automotive and aircraft engine industries. The solubility limit of silicon (Si) in Al …
The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing
Improving the engineering properties of A356 alloy is an appealing option for the automotive
industry. This study aimed at refining and redistributing Si particles and the eutectic phase …
industry. This study aimed at refining and redistributing Si particles and the eutectic phase …
Microstructure Refinement by a Combination of Heat Treatment and Thixoforming Process Followed by Severe Plastic Deformation and Their Effects on Al-Si Alloy …
This study fabricated a thixoformed Al-7% Si alloy using the cooling slope technique and
subjected it to heat treatment before processing with severe plastic deformation to determine …
subjected it to heat treatment before processing with severe plastic deformation to determine …
The Influence of Mn addition on corrosion resistance of secondary AlSi7Mg0. 3 alloys with higher Fe content
Z Šurdová, E Tillová, L Kuchariková… - Transportation Research …, 2023 - Elsevier
This paper focuses on the study of secondary AlSi7Mg0. 3 alloy with higher Fe content with
the addition of manganese as well as applied heat treatment. The quantitative analysis was …
the addition of manganese as well as applied heat treatment. The quantitative analysis was …
Influence of Equal Channel Angular Pressing Processing on the Microstructure, Hardness and Corrosion Resistance of Al-Si Alloy
MA Gebril - Advanced Materials Research, 2024 - Trans Tech Publ
In this study, the impact of heat treatment and Equal Channel Angular Pressing (ECAP)
processing routes on refining the microstructure, hardness, and corrosion resistance of Al …
processing routes on refining the microstructure, hardness, and corrosion resistance of Al …
Exploration of Various Forging Route Performance of Cast A356 Alloy Reinforced with Fly Ash and MWCNT Hybrid Composites
This proposed study is concerned with casted virgin A356 alloy and stir casted A356
reinforcement with 8 wt% power plant waste fly ash particles and 2 wt% of multi-wall carbon …
reinforcement with 8 wt% power plant waste fly ash particles and 2 wt% of multi-wall carbon …