The accurate determination of residual stresses has a crucial role in understanding the
complex interactions between microstructure, mechanical state, mode (s) of failure, and …

Welding deformation and residual stress have negative influence on assembly accuracy and
service performance. Thermal elastic plastic (TEP) and inherent strain finite element …

This study examined the structural integrity and residual stresses of dissimilar welding
between super duplex stainless steel (sDSS 2507) and Inconel 625 using ER2594 filler wire …

High nitrogen austenitic stainless steels are in great demand due to their outstanding
combination of strength and ductility, excellent work-hardening capability and corrosion …

The purpose of this study is to evaluate changes in the mechanical, micro structural and the
corrosion properties of stainless steel 316L under repeated repair welding. The welding and …

The temperature distribution and residual stresses for a GTAW circumferential butt joint of
AISI 304 stainless steel using numerical simulation have been evaluated. For evaluation of …

Abstract Series of stainless steel clad plates were heat treated at the quenching
temperatures ranging from 900° C to 1150° C for holding time of 6min and 60min …

In the present investigation, an attempt has been made to investigate the replacement
compatibility of conventional austenitic stainless steel (316L) with low-Ni austenitic stainless …

Multiple repair welding of X20Cr13 martensitic stainless steel was performed using gas
metal arc welding. The groove for repair welding was designed such that the heat affected …

In order to reduce the welding cost and improve welding quality, L415/316L bimetal
mechanical lined pipes were welded using the post internal-welding process in which the …