Cold-formed steel (CFS) members are susceptible to geometric imperfections due to the
high length-to-thickness ratio of the flat partitions, in other words, high slenderness …

The structural behavior of cold-formed steel (CFS) built-up beams that are gaining interest in
the construction industry is investigated in this study. As per the current American Iron and …

Built-up sections are commonly used in cold-formed steel (CFS) structures. The built-up
sections are either welded or mechanically fastened based on the need and necessity …

Torsional buckling is a common mode of failure in highly slender Cold-formed Steel (CFS)
stud wall frames. The torsional buckling mode will induce pull-through in sheathings …

Experimental and numerical studies are conducted to investigate cold-formed hat-shaped
members' flexural behaviour and determine the effects of different parameters on the …

The bracing effect of Particle Cement Board (PCB) sheathing for the Cold-formed steel
(CFS) wall stud is explored in this study. Owing to the higher slenderness, the CFS wall stud …

Abstract Cold-Formed Steel (CFS) is considered as a sustainable material and CFS
members are becoming popular nowadays as primary or secondary load carrying structural …

Recently, there has been a resurgence in the adoption of lightweight cold-formed steel
(CFS) profiles as structural elements in low-to mid-rise modular construction. Typically …

This paper investigates the bracing effect of sheathing fastener connection on point-
symmetric shaped cold formed steel (CFS) studs through full-scale laboratory tests. The test …

An experimental study was conducted to explore the strength contribution of plywood
sheathing boards that are regularly used in the cold-formed steel (CFS) wall panel …