[HTML][HTML] The seismic vulnerability assessment methodologies: A state-of-the-art review
In the past decades, the research and development of methodologies have received
considerable attention which quantified earthquake-related damages to structures. Among …
considerable attention which quantified earthquake-related damages to structures. Among …
Pushover Analysis in Seismic Engineering: A Detailed Chronology and Review of Techniques for Structural Assessment
KK Kuria, OK Kegyes-Brassai - Applied Sciences, 2023 - mdpi.com
This study analyzes the progression, utilization, and inherent challenges of traditional non-
linear static procedures (NSPs) such as the capacity spectrum method, the displacement …
linear static procedures (NSPs) such as the capacity spectrum method, the displacement …
Comparison of static pushover and dynamic analyses using RC building shaking table experiment
S Li, Z Zuo, C Zhai, L Xie - Engineering Structures, 2017 - Elsevier
The main objective of this study is to assess the accuracy and applicability of static pushover
analysis (POA). The POA is widely used to estimate the structural seismic response due to …
analysis (POA). The POA is widely used to estimate the structural seismic response due to …
Adaptive upper-bound pushover analysis for high-rise moment steel frames
In this paper, a new nonlinear static analysis procedure is proposed to assess the seismic
performance of tall buildings, which considers both the higher modes effects as well as the …
performance of tall buildings, which considers both the higher modes effects as well as the …
On the accuracy of enhanced pushover procedures for seismic performance evaluation of code-conforming RC moment-resisting frame buildings subjected to pulse …
In this paper, the applicability and validity of enhanced pushover procedures in estimating
the seismic demands of mid-and high-rise reinforced concrete (RC) building frames under …
the seismic demands of mid-and high-rise reinforced concrete (RC) building frames under …
An updated consecutive modal pushover (UCMP) procedure for estimating the ductility level earthquake design demands of jacket offshore platforms
Abstract According to API-RP-2EQ/ISO 19901-2: 2004 (E), the static pushover method is
allowed to be utilized for the abnormal level earthquake (ALE) design check of jacket type …
allowed to be utilized for the abnormal level earthquake (ALE) design check of jacket type …
An improved upper-bound pushover procedure for seismic assessment of high-rise moment resisting steel frames
In recent years, nonlinear static procedures (NSPs) have gained considerable popularity as
an efficient tool in the performance based seismic design practice. This was backed by …
an efficient tool in the performance based seismic design practice. This was backed by …
Applicability of the N2, extended N2 and modal pushover analysis methods for the seismic evaluation of base-isolated building frames with lead rubber bearings …
HN Faal, M Poursha - Soil Dynamics and Earthquake Engineering, 2017 - Elsevier
In the recent investigations, the pushover analysis has been mainly used for the seismic
evaluation of fixed-base structures, whereas a limited number of research investigations …
evaluation of fixed-base structures, whereas a limited number of research investigations …
Extension of the improved upper-bound pushover analysis for seismic assessment of steel moment resisting frames with setbacks
AY Rahmani, M Badaoui, N Bourahla… - Bulletin of Earthquake …, 2022 - Springer
Pushover analysis technique is a key tool for the performance-based seismic design that
has been largely adopted in the new generation of seismic codes. Therefore, more precise …
has been largely adopted in the new generation of seismic codes. Therefore, more precise …
A simplified normalized multi-mode nonlinear static procedure (NMP) for seismic performance evaluation of building structures
The current work presents a simplified multi-mode nonlinear static procedure based on
normalizing the deformation demands (called NMP) for estimating the seismic demands of …
normalizing the deformation demands (called NMP) for estimating the seismic demands of …