Mechanical properties of graphene platelet-reinforced alumina ceramic composites
J Liu, H Yan, K Jiang - Ceramics International, 2013 - Elsevier
Alumina (Al2O3) ceramic composites reinforced with graphene platelets (GPLs) were
prepared using Spark Plasma Sintering. The effects of GPLs on the microstructure and …
prepared using Spark Plasma Sintering. The effects of GPLs on the microstructure and …
[图书][B] Carbon nanotubes: reinforced metal matrix composites
This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological
era of nanotechnology. Among the most widely studied areas of CNT research is their use …
era of nanotechnology. Among the most widely studied areas of CNT research is their use …
Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites
Copper is widely used in many applications due to its excellent electric conductivity,
processing ductility and corrosion resistance. However, poor hardness and low strength are …
processing ductility and corrosion resistance. However, poor hardness and low strength are …
Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized …
The carbon nanotube (CNT) is becoming more popular due to their low-density, high-
strength etc. Among CNTs, multi-walled carbon nanotubes (MWCNTs) are gaining more …
strength etc. Among CNTs, multi-walled carbon nanotubes (MWCNTs) are gaining more …
Graphene oxide-reinforced aluminum alloy matrix composite materials fabricated by powder metallurgy
Graphene oxide (GO) powder was dispersed in an AlMg5 matrix using high energy ball
milling. The obtained blend was then completely densified by hot pressing. No further …
milling. The obtained blend was then completely densified by hot pressing. No further …
[HTML][HTML] Friction and wear behavior of Al-SiC (n) hybrid composites with carbon addition
B Hekner, J Myalski, N Valle, A Botor-Probierz… - Composites Part B …, 2017 - Elsevier
Aluminum matrix composites with heterogeneous reinforcement of SiC nanoparticles (SiC
(n)) and carbon (multiwalled carbon nanotubes or glassy carbon particles) were …
(n)) and carbon (multiwalled carbon nanotubes or glassy carbon particles) were …
Hot extruded carbon nanotube reinforced aluminum matrix composite materials
H Kwon, M Leparoux - Nanotechnology, 2012 - iopscience.iop.org
Carbon nanotube (CNT) reinforced aluminum (Al) matrix composite materials were
successfully fabricated by mechanical ball milling followed by powder hot extrusion …
successfully fabricated by mechanical ball milling followed by powder hot extrusion …
[HTML][HTML] Synergistic strengthening effect of carbon nanotubes (CNTs) and titanium diboride (TiB2) microparticles on mechanical properties of copper matrix …
Synergistic strengthening is increasingly explored for developing high-performance metal
matrix composites. In the present work, copper matrix composites reinforced with carbon …
matrix composites. In the present work, copper matrix composites reinforced with carbon …
Fabrication, characterization and mechanical properties of hybrid composites of copper using the nanoparticulates of SiC and carbon nanotubes
Copper based hybrid composites containing nano-sized silicon carbide and carbon
nanotubes reinforcements with minimal porosity were fabricated via mechanical milling …
nanotubes reinforcements with minimal porosity were fabricated via mechanical milling …
Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites
Abstract 6061 aluminum (Al6061) alloy matrix composites with hybrid reinforcements
composed of both carbon nanotubes (CNTs) and silicon carbide particles (SiC p) were …
composed of both carbon nanotubes (CNTs) and silicon carbide particles (SiC p) were …