A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys
In the present work, microstructure and texture evolution during plastic deformation and
annealing treatment of near beta (β), meta-stable β, and stable β-Ti alloys are reviewed. The …
annealing treatment of near beta (β), meta-stable β, and stable β-Ti alloys are reviewed. The …
Effect of Zr on the martensitic transformation and the shape memory effect in Ti-Zr-Nb-Ta high-temperature shape memory alloys
J Wang, Q Li, C Xiong, Y Li, B Sun - Journal of Alloys and Compounds, 2018 - Elsevier
The microstructures, phase transformations, mechanical properties and shape memory
effect of Ti-xZr-10Nb-4Ta (x= 16, 18, 19 and 19.5 at.%) alloys were investigated. The X-ray …
effect of Ti-xZr-10Nb-4Ta (x= 16, 18, 19 and 19.5 at.%) alloys were investigated. The X-ray …
Optimum rolling ratio for obtaining {001}< 110> recrystallization texture in Ti–Nb–Al biomedical shape memory alloy
The rolling rate (r) dependence of textures was investigated in the Ti–26Nb–3Al (mol%)
alloy to reveal the conditions required to form the {001}< 110> recrystallization texture, which …
alloy to reveal the conditions required to form the {001}< 110> recrystallization texture, which …
Contributions to mechanical characteristics improvement of some biomedical TNTZ alloys by adding Fe, Si, and O: a comparative study
Abstract The effects of Fe, Si, and O additions on the mechanical properties of some
biomedical TNTZ β-Ti alloys were analyzed to reveal the dissimilarities arising between …
biomedical TNTZ β-Ti alloys were analyzed to reveal the dissimilarities arising between …
Deformation textures of aluminum in a multilayered Ti/Al/Nb composite severely deformed by accumulative roll bonding
P Qu, L Zhou, VL Acoff - Materials Characterization, 2015 - Elsevier
The accumulative roll bonding process was carried out to produce multilayered Ti/Al/Nb
composites up to four cycles. Scanning electron microscopy, transmission electron …
composites up to four cycles. Scanning electron microscopy, transmission electron …
Microstructure and elastic modulus evolution of TiTaNb alloys
In order to develop Ti based alloys with promising biocompatibility and matching mechanical
response with human bone, TiTaNb alloys with 15, 23 and 30 mass% Ta are designed and …
response with human bone, TiTaNb alloys with 15, 23 and 30 mass% Ta are designed and …
Texture evolution during ARB (Accumulative Roll Bonding) processing of Ti–10Zr–5Nb–5Ta alloy
Titanium alloys are extensively used in a variety of applications due to their good
mechanical properties, high biocompatibility and corrosion resistance. In the last decade, α …
mechanical properties, high biocompatibility and corrosion resistance. In the last decade, α …
Electron backscatter diffraction analysis on the microstructures of electrolytic Cu deposition in the through hole filling process
Through hole (TH) filling by electrolytic Cu deposition has become a critical process for high
density interconnection technologies associated with three-dimensional packaging. In this …
density interconnection technologies associated with three-dimensional packaging. In this …
Texture in ultra-strength Ti–25Ta–25Nb alloy strips
Abstract A Ti–25Ta–25Nb (wt%) alloy was subjected to a thermo-mechanical (TM)
processing route consisting in following stages: plastic deformation by cold-rolling …
processing route consisting in following stages: plastic deformation by cold-rolling …
X-ray Diffraction Study and Texture Evolution for a Ti-Nb-Ta Biomedical Alloy Processed by Accumulative Roll Bonding
Abstract A Ti-25Nb-25Ta β-type alloy was subjected to severe plastic deformation via
accumulative roll bonding; the method was applied on two different precursor samples, in …
accumulative roll bonding; the method was applied on two different precursor samples, in …