Controllable preparation of metal-based lubrication coatings in extreme environmental applications
S Wu, Y Tang, J Gu, R Li, Y Liang, P Liu, H Wang… - Materials & Design, 2024 - Elsevier
Rapid advances in modern industrial tribo-systems under high temperatures and heavy
loads generate a growing demand for lubricating materials used in extreme environmental …
loads generate a growing demand for lubricating materials used in extreme environmental …
High-temperature tribological behavior of plasma sprayed GNPs-reinforced YSZ coating over 316L stainless steel
Despite numerous studies focusing on the use of stainless steel (SS316L) in high-
temperature tribological applications, there remains a significant research gap regarding the …
temperature tribological applications, there remains a significant research gap regarding the …
[HTML][HTML] Development of Method for Applying Multilayer Gradient Thermal Protective Coatings Using Detonation Spraying
D Buitkenov, A Nabioldina, N Raisov - Coatings, 2024 - mdpi.com
In this work, multilayer gradient coatings obtained by detonation spraying were studied. To
obtain a multilayer gradient coating by detonation spraying, two modes with different …
obtain a multilayer gradient coating by detonation spraying, two modes with different …
The Microstructure and Corrosion Resistance of Inconel 718 Coating by Plasma-Enhanced High-Velocity Arc Spraying
H Zhang, W Liu, M Liu, R Gao, B Zhang, S Chen… - Journal of Thermal …, 2025 - Springer
The study aimed to investigate the effect of spraying distance on the microstructure and
corrosion resistance of Inconel 718 coatings applied using the plasma-enhanced high …
corrosion resistance of Inconel 718 coatings applied using the plasma-enhanced high …
Mechanical Behaviour and Low Cycle Fatigue Performance of Plasma Sprayed ZrO2 Coated Al-7075-T6 Alloy Under Subzero Temperature Condition
K Ganesan, DK Selvan, M Madhu, G Archana - Journal of Alloys and …, 2025 - Elsevier
This study investigates the mechanical and low-cycle fatigue (LCF) behaviour of ZrO 2-
coated Al-7075-T6 alloy under subzero temperature conditions (-60° C). Tensile and LCF …
coated Al-7075-T6 alloy under subzero temperature conditions (-60° C). Tensile and LCF …
Synergistic approach to wear rate forecasting in AZ31/5% Yttria stabilized zirconia reinforced composite through response surface methodology-genetic algorithm …
V Packkirisamy… - Proceedings of the …, 2024 - journals.sagepub.com
In this work, the wear behavior of a novel AZ31 magnesium alloy reinforced with 5% yttria-
stabilized zirconia (YSZ) composite was evaluated using a hybrid Response Surface …
stabilized zirconia (YSZ) composite was evaluated using a hybrid Response Surface …
[HTML][HTML] Investigation of Structural Phase, Mechanical, and Tribological Characteristics of Layer Gradient Heat-Protective Coatings Obtained by the Detonation …
D Buitkenov, B Rakhadilov, A Nabioldina… - Materials, 2024 - mdpi.com
This paper presents the results of a study of layer gradient thermal protection coatings based
on NiCrAlY and YSZ obtained by detonation spraying. Modern gas turbines and high …
on NiCrAlY and YSZ obtained by detonation spraying. Modern gas turbines and high …
Comparative Study on Tribological Behavior of Plasma-Sprayed YSZ Coatings Deposited with Different Powders
L Bai, H Zhang, G Yi, Z Zhao, H Sun - Journal of Materials Engineering …, 2024 - Springer
The tribological behavior of two kinds of atmospheric plasma-sprayed YSZ coatings
manufactured from fused/crushed (YSZC) and the plasma-densified (YSZP-D) powders was …
manufactured from fused/crushed (YSZC) and the plasma-densified (YSZP-D) powders was …
[HTML][HTML] The Influence of Load and Ball on the Sliding Wear Characteristics of HVOF-Sprayed WC-12Co Composite Coating
A Avcı - Coatings, 2024 - mdpi.com
This study examines the impact of various abrasive balls and sliding loads on WC-12Co
coatings. For this purpose, 4 N, 8 N, and 12 N loads were applied to the WC-12Co …
coatings. For this purpose, 4 N, 8 N, and 12 N loads were applied to the WC-12Co …
INVESTIGATION OF WEAR BEHAVIOR OF COMPOSITE CYSZ COATING UNDER DIFFERENT LOADS
A Avcı, M Karabas - … Journal of 3D Printing Technologies and Digital …, 2024 - dergipark.org.tr
In this study, CeO2-Y2O3 stabilized ZrO2 (CYSZ) ceramic coatings, with Al2O3 and TiO2
added, were deposited on bond layer coated AISI304 stainless steel substrates by plasma …
added, were deposited on bond layer coated AISI304 stainless steel substrates by plasma …