Materials of solid oxide electrolysis cells for H2O and CO2 electrolysis: A review.
P Qiu, C Li, B Liu, D Yan, J Li… - Journal of Advanced …, 2023 - search.ebscohost.com
Reliable and economical energy storage technologies are urgently required to ensure
sustainable energy supply. Hydrogen (H< sub> 2) is an energy carrier that can be produced …
sustainable energy supply. Hydrogen (H< sub> 2) is an energy carrier that can be produced …
[HTML][HTML] Experimental review of the performances of protective coatings for interconnects in solid oxide fuel cells
Ferritic stainless steel interconnects are used in solid oxide fuel cells; however, coatings are
required to improve their performance. Although several types of coatings have been …
required to improve their performance. Although several types of coatings have been …
Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects
B Talic, H Falk-Windisch, V Venkatachalam… - Journal of Power …, 2017 - Elsevier
Manganese cobalt spinel oxides are promising materials for protective coatings for solid
oxide fuel cell (SOFC) interconnects. To achieve high density such coatings are often …
oxide fuel cell (SOFC) interconnects. To achieve high density such coatings are often …
Improved resistance to chloride-induced corrosion through the combined influence of surface nanocrystallization and thermal oxidation treatments on AISI 321 …
This study comparatively examines the impact of combined surface nanocrystallization
(SNC) and thermal oxidation (TO) treatments on the corrosion performance of AISI 321 …
(SNC) and thermal oxidation (TO) treatments on the corrosion performance of AISI 321 …
Solid oxide electrochemical systems: Material degradation processes and novel mitigation approaches
Solid oxide electrochemical systems, such as solid oxide fuel cells (SOFC), solid oxide
electrolysis cells (SOEC), and oxygen transport membranes (OTM) enable clean and …
electrolysis cells (SOEC), and oxygen transport membranes (OTM) enable clean and …
Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU
The ferritic stainless steel Crofer 22 APU is attractive for the use as interconnects in solid
oxide fuel cell stacks. The oxidation rate of this alloy in air at 800° C was reduced by pre …
oxide fuel cell stacks. The oxidation rate of this alloy in air at 800° C was reduced by pre …
Role of the alloy grain boundaries in the high-temperature oxidation and Cr volatilization of 22 wt% Cr ferritic stainless steel for SOFC applications
The effects of alloy grain size of high-Cr ferritic stainless steel were investigated using a
sheet (t= 2 mm) and plate (t= 22 mm) of Cr ferritic stainless steel. The average grain size of …
sheet (t= 2 mm) and plate (t= 22 mm) of Cr ferritic stainless steel. The average grain size of …
High temperature oxidation and chromium volatilisation of AISI 430 stainless steel coated by Mn-Co and Mn-Co-Cu oxides for SOFC interconnect application
T Thublaor, S Chandra-ambhorn - Corrosion Science, 2020 - Elsevier
An AISI 430 stainless steel was coated by Mn-Co and Mn-Co-Cu oxides, then tested in O 2-
5% H 2 O at 800° C. The coated samples had reduced rates of oxidation and Cr loss due to …
5% H 2 O at 800° C. The coated samples had reduced rates of oxidation and Cr loss due to …
Development of annealed Mn–Co and Mn–Co–Cu coated AISI 430 stainless steels for SOFC interconnect application
T Thublaor, P Wiman, T Siripongsakul… - Oxidation of Metals, 2021 - Springer
Abstract The developed Mn–Co and Mn–Co–Cu electroplated AISI 430 stainless steels
were annealed in argon and further treated in oxygen, at 800° C for 4 h in each step. The …
were annealed in argon and further treated in oxygen, at 800° C for 4 h in each step. The …
Volatilization of chromium from AISI 441 stainless steel: Time and temperature dependence
R Spotorno, D Paravidino, S Delsante… - Surface and Coatings …, 2022 - Elsevier
In this work, a photospectrometric method was used to quantify chromium evaporation from
the AISI 441 ferritic stainless steel. Experiments were conducted for 250 h in the temperature …
the AISI 441 ferritic stainless steel. Experiments were conducted for 250 h in the temperature …