Accurate measurement and prediction of laminar burning velocity is important for
characterization of premixed combustion properties of a fuel, development and validation of …

The state of the art and the further challenges of combustion chemistry research in laminar
flames are reviewed. Laminar flames constitute an essential part of kinetic model …

This work presents an updated experimental and kinetic modeling study of n-heptane
oxidation. In the experiments, ignition delay times of stoichiometric n-heptane/air mixtures …

The primary objective of the present endeavor is to collect, consolidate, and review the vast
amount of experimental data on the laminar flame speeds of hydrocarbon and oxygenated …

The adiabatic laminar burning velocities of a commercial gasoline and of a model fuel (n-
heptane, iso-octane, and toluene mixture) of close research octane number have been …

Measurements of the adiabatic laminar burning velocities of n-heptane, iso-octane, ethanol
and their binary and tertiary mixtures are reported. Non-stretched flames were stabilized on …

The low-temperature oxidation of n-heptane, one of the reference species for the octane
rating of gasoline, was investigated using a jet-stirred reactor and two methods of analysis …

Adiabatic laminar burning velocities for methane, n-heptane, and iso-octane blended with
ammonia were experimentally determined using the heat flux method. The flames were …

Laminar flame speeds of several fuel/air mixtures were experimentally determined over
equivalence ratios of ϕ= 0.7–1.3, preheat temperatures of Tu= 350–470K, and pressures of …

Improvement of gasoline combustion efficiency and its emission reduction are the hot theses
of the gasoline components and its surrogate fuels. In this paper, the mechanism and …