[HTML][HTML] Applying multi-pass friction stir processing to refine the microstructure and enhance the strength, ductility and corrosion resistance of WE43 magnesium alloy
Magnesium alloys have many unique properties, mostly benefitting from the low density of
magnesium. However, they are not competitive, when compared with other lightweight …
magnesium. However, they are not competitive, when compared with other lightweight …
Thermal conductivity of magnesium alloys in the temperature range from− 125 C to 400 C
S Lee, HJ Ham, SY Kwon, SW Kim, CM Suh - International Journal of …, 2013 - Springer
Magnesium alloys have been widely used in recent years as lightweight structural materials
in the manufacturing of automobiles, airplanes, and portable computers. Magnesium alloys …
in the manufacturing of automobiles, airplanes, and portable computers. Magnesium alloys …
Microstructural, Mechanical, and Corrosion Properties of AZXX Magnesium Alloy: A Review of Processing Methods
TU Dhanaji, S Dassani, M Somasundaram… - Crystals, 2023 - mdpi.com
Magnesium (Mg) and its alloys are considered an ideal material for aerospace, medical,
energy, and automotive purposes, because of their low density and high specific strength …
energy, and automotive purposes, because of their low density and high specific strength …
Dry sliding wear behaviour of ZE41A magnesium alloy
Wear resistance of the ZE41A magnesium alloy was tested using pin-on-disc technique and
steel as counterbody on dry sliding conditions. Wear rates and friction coefficients were …
steel as counterbody on dry sliding conditions. Wear rates and friction coefficients were …
Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation
H Mirzadeh - Materials Chemistry and Physics, 2015 - Elsevier
The flow stress of pure magnesium and ZK60 (Mg–6Zn-0.6 Zr) magnesium alloy during high-
temperature deformation were correlated to the Zener-Hollomon parameter through …
temperature deformation were correlated to the Zener-Hollomon parameter through …
Hot deformation and processing maps of as-extruded Mg–9.8 Gd–2.7 Y–0.4 Zr Mg alloy
H Zhou, QD Wang, B Ye, W Guo - Materials Science and Engineering: A, 2013 - Elsevier
The deformation behavior of as-extruded Mg–9.8 Gd–2.7 Y–0.4 Zr Mg alloy is investigated
by compression test with Gleeble-3500 thermal simulator at temperature of 648–723K and …
by compression test with Gleeble-3500 thermal simulator at temperature of 648–723K and …
[HTML][HTML] Variations in dynamic recrystallization behavior and mechanical properties of AZ31 alloy with extrusion temperature
JW Cha, SH Park - Journal of Magnesium and Alloys, 2023 - Elsevier
This study investigates the effects of extrusion temperature on the dynamic recrystallization
(DRX) behavior of a Mg–3Al–1Zn–0.3 Mn (AZ31, wt%) alloy during hot extrusion and on the …
(DRX) behavior of a Mg–3Al–1Zn–0.3 Mn (AZ31, wt%) alloy during hot extrusion and on the …
Microstructure and mechanical properties of SiCp/AZ91 composite deformed through a combination of forging and extrusion process
In this paper, 10vol.% SiCp/AZ91 magnesium matrix composites were fabricated by stir
casting technology. The as-cast ingots were forged at 420° C with 50% reduction, and then …
casting technology. The as-cast ingots were forged at 420° C with 50% reduction, and then …
[PDF][PDF] 轧制温度对AZ61 镁合金耐腐蚀性的影响
张涛， 邹金超， 黄志权， 赵春江… - 有色金属科学与 …, 2023 - ysjskxygc.xml-journal.net
采用金相显微镜, X 射线衍射仪, 极化曲线, 电化学阻抗谱和浸泡实验对轧后(轧制温度分别为:
300,350,380,400℃) AZ61 镁合金分别进行了微观表征和性能测试. 研究了轧制温度对AZ61 …
300,350,380,400℃) AZ61 镁合金分别进行了微观表征和性能测试. 研究了轧制温度对AZ61 …
Effects of bimodal size SiC particles on the microstructure evolution and fracture mechanism of AZ91 matrix at room temperature
K Deng, X Wang, C Wang, J Shi, X Hu, K Wu - Materials Science and …, 2012 - Elsevier
In this paper,(0.2 μm 1%+ 10μm 9%) bimodal size SiCp/AZ91 magnesium matrix composite
was fabricated by the stir casting. After being forged at 420° C with 50% reduction, the …
was fabricated by the stir casting. After being forged at 420° C with 50% reduction, the …