Rapid Impregnating Resins for Fiber-Reinforced Composites Used in the Automobile Industry
MX Li, HL Mo, SK Lee, Y Ren, W Zhang, SW Choi - Polymers, 2023 - mdpi.com
As environmental regulations become stricter, weight-and cost-effective fiber-reinforced
polymer composites are being considered as alternative materials in the automobile …
polymer composites are being considered as alternative materials in the automobile …
Effect of Glass Fiber on the Tensile Strength of Poly (butylene terephthalate)/Polyamide 6 Blends
This study analyzed and evaluated the mechanical properties of the Poly (butylene
terephthalate)(PBT)/Polyamide 6 (PA6) mixture and the effect of glass fiber (GF) when mixed …
terephthalate)(PBT)/Polyamide 6 (PA6) mixture and the effect of glass fiber (GF) when mixed …
Correlation of Wear Behavior of PBT/PC Blend with Crystallographic Structure: A Comprehensive Study on Wear Rate and Crystal Structure
Polymer blends, particularly those containing Polybutylene terephthalate (PBT) and
Polycarbonate (PC), are extensively utilized in various industrial applications due to their …
Polycarbonate (PC), are extensively utilized in various industrial applications due to their …
Effect of Ethylene-Vinyl Acetate on the properties of Polybutylene Terephthalate/Ethylene-Vinyl Acetate polymer blends
PTH Nga, N Van Thuc - Advanced Composite Materials, 2024 - Taylor & Francis
This research study analyzes the influence of Ethylene-Vinyl Acetate (EVA) resin on the
properties of Polybutylene Terephthalate (PBT)/EVA blends produced by injection molding …
properties of Polybutylene Terephthalate (PBT)/EVA blends produced by injection molding …
Effect of Processing Optimization on the Dispersion of Polycarbonate Red Dye on Compounded Plastics
The objects of the current study will analyze to determine the effect of the let--down ratios
(LDR) with different materials are blended in a specified ratio, the ratio typically up to 100: 1 …
(LDR) with different materials are blended in a specified ratio, the ratio typically up to 100: 1 …
A study on tensile strength of 3D-printed PLA samples by fused deposition modeling
BD Nguyen, NTT That, TK Nguyen - The International Conference on …, 2023 - Springer
Fused deposition modeling (FDM) is a widely used technique in 3D printing, adopted by
both hobbyists and professionals as well as for education. This technology offers numerous …
both hobbyists and professionals as well as for education. This technology offers numerous …
The Impact of Artificial Marble Wastes on Heat Deflection Temperature, Crystallization, and Impact Properties of Polybutylene Terephthalate
T Feng, Y Li, L Fang, Z Chen - Polymers, 2021 - mdpi.com
As artificial marble is abundant and widely used in residential and commercial fields, the
resource utilization of artificial marble wastes (AMWs) has become extremely important in …
resource utilization of artificial marble wastes (AMWs) has become extremely important in …
甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物对刚性有机粒子增强聚碳酸酯共混物的增容作用.
洪雨彤， 苏昱凯， 柴娟， 王炳涛… - … Materials Science & …, 2023 - search.ebscohost.com
基于刚性有机粒子苯乙烯-丙烯腈共聚物(SAN) 高强高模的特性, 通过熔融共混法制备了聚碳酸
酯(PC)/SAN/甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物(MBS) 的共混物, 研究了MBS …
酯(PC)/SAN/甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物(MBS) 的共混物, 研究了MBS …
Effect of Thermoplastic Polyurethane on the Mechanical Properties and Structure of Poly (butylene terephthalate)/Thermoplastic Polyurethane Blend
Poly (butylene terephthalate) is a rigid polymer with poor elasticity and impact resistance. In
this research, thermoplastic polyurethane is mixed with poly (butylene terephthalate) …
this research, thermoplastic polyurethane is mixed with poly (butylene terephthalate) …
聚碳酸酯/聚对苯二甲酸丁二醇酯交替层状复合材料的制备和冲击性能提升.
程慧强， 向阳， 潘洋， 吴宏… - Polymer Materials Science …, 2023 - search.ebscohost.com
如何调控酯交换反应程度是改善聚碳酸酯/聚对苯二甲酸丁二醇酯(PC/PBT)
共混物冲击强度的关键. 文中采用酯交换抑制剂焦磷酸二氢二钠(DPPH) 和多层挤出加工技术 …
共混物冲击强度的关键. 文中采用酯交换抑制剂焦磷酸二氢二钠(DPPH) 和多层挤出加工技术 …