Up to the date of writing this article, a quantitative analysis between corrosion rate and
combined microstructural parameters including composition, grain size, and precipitations …

Severe plastic deformation (SPD) is known to be the best method for producing bulk ultrafine-
grained and nanostructured materials with excellent properties. Different SPD methods were …

This paper presents a comprehensive review of the successful application of Severe Plastic
Deformation (SPD) in producing ultra-fine grained (UFG) and nano-structured crystalline …

In this study, a new method of backward extrusion using small diameter billet is proposed. In
this new process, the die setup consists of three main parts of the fix-punch, the moveable …

In the present paper, the effect of cyclic expansion extrusion (CEE) process on the
microstructure inhomogeneity and microhardness distribution of AM60 magnesium alloy is …

In this study, a modified novel backward extrusion process implementing severe plastic
deformation is presented for processing of ultrafine-grained materials. Deformation zone …

The main objective of this work is to achieve ultra-fine grained structures within the pure
aluminum sheet via equal channel angular rolling (ECAR). An attempt has been made to …

An investigation was conducted on aluminum samples (AA1050) to study the microstructure
and hardness evolution during processing by High Pressure Torsion Extrusion (HPTE). The …

Hydrostatic radial forward tube extrusion (HRFTE) as a new and innovative method is
developed for producing large-diameter seamless tubes from smaller hollow billets. The …

A new Mg alloy was cast, then extruded, and finally multidirectionally forged (MDF) at 180° C
(MDF180) and 300° C (MDF300). The corrosion behavior was evaluated using …