Development of dlc-coated solid sialon/tin ceramic end mills for nickel alloy machining: Problems and prospects
SN Grigoriev, MA Volosova, SV Fedorov, AA Okunkova… - Coatings, 2021 - mdpi.com
The study is devoted to the development and testing of technological principles for the
manufacture of solid end mills from ceramics based on a powder composition of α-SiAlON, β …
manufacture of solid end mills from ceramics based on a powder composition of α-SiAlON, β …
Improved thermoelectric properties of SiC with TiC segregated network structure
A TiC segregated network structure (SNS) approach was utilised to improve the
thermoelectric properties of SiC. Different amounts of TiC particles were dry coated on SiC …
thermoelectric properties of SiC. Different amounts of TiC particles were dry coated on SiC …
Microstructures and properties of Si3N4/TiN composites sintered by hot pressing and spark plasma sintering
M Zhou, J Zhong, J Zhao, D Rodrigo… - Materials Research Bulletin, 2013 - Elsevier
Microstructures and mechanical properties of the Si3N4/TiN composites sintered by hot
pressing (HP) and spark plasma sintering (SPS) were studied comparatively. Compared …
pressing (HP) and spark plasma sintering (SPS) were studied comparatively. Compared …
Microstructure and mechanical properties of TiN/Si3N4 nanocomposites by spark plasma sintering (SPS)
TiN/Si3N4 nanocomposites were fabricated from β-Si3N4 and TiN nano powders by powder
processing routes. The specimens were consolidated at 1600° C for 3min by spark plasma …
processing routes. The specimens were consolidated at 1600° C for 3min by spark plasma …
Phase evolution of a novel silicon-alumina-fused mullite-containing Ti2O3 refractory at 1300° C in N2
X Yue, Y Li, H Li, C Ma, X Zhang - Ceramics International, 2022 - Elsevier
A novel silicon-alumina-fused mullite-containing Ti 2 O 3 composite refractory is prepared
and sintered in the presence of solid carbon at 1300° C in N 2. The sintered samples exhibit …
and sintered in the presence of solid carbon at 1300° C in N 2. The sintered samples exhibit …
Influence of Conductive Nano‐TiC on Microstructural Evolution of Si3N4‐Based Nanocomposites in Spark Plasma Sintering
A conductive TiC nanopowder was incorporated into nanosized β‐Si3N4‐based powder
and consolidated by a spark plasma sintering (SPS) technique with a rapid heating process …
and consolidated by a spark plasma sintering (SPS) technique with a rapid heating process …
Effects of the electric current on conductive Si3N4/TiN composites in spark plasma sintering
M Zhou, D Rodrigo, YB Cheng - Journal of alloys and compounds, 2013 - Elsevier
The effect of the electric current in spark plasma sintering (SPS) process on the
densification, phase transformation, microstructure and mechanical properties of conductive …
densification, phase transformation, microstructure and mechanical properties of conductive …
Microwave sintering of SiAlON ceramics with TiN addition
α-β SiAlON/TiN composites with nominal composition of α: β= 25: 75 were fabricated by
microwave sintering. The effect of titanium nitride addition on the phases, microstructure …
microwave sintering. The effect of titanium nitride addition on the phases, microstructure …
Copper reinforced SiAlON matrix composites produced by spark plasma sintering
Abstract Cu particles (vol%. 0, 10, 20, 30) were incorporated into the α ı: β ı-SiAlON matrix to
investigate its effect on fracture toughness, Vickers hardness, density, friction, and wear. The …
investigate its effect on fracture toughness, Vickers hardness, density, friction, and wear. The …
Obtaining Ceramic Based on Si3N4 and TiN by Spark Plasma Sintering
AA Evdokimov, AA Sivkov, DY Gerasimov - Glass and Ceramics, 2016 - Springer
The dependences of the microstructure and physical-mechanical properties of Si 3 N 4–TiN-
based ceramic in a wide range of mass ratios of the components are examined. The …
based ceramic in a wide range of mass ratios of the components are examined. The …