It is now well established that the processing of bulk solids through the application of severe
plastic deformation (SPD) leads to exceptional grain refinement to the submicrometer or …

Bulk nanoSPD materials are materials with nanostructural features, such as nanograins,
nanoclusters, or nanotwins, produced by severe plastic deformation (SPD) techniques. Such …

Severe plastic deformation processes involve large grain rotations due to the action of
different modes of plastic deformation and other microstructural changes which lead to …

On the basis of the “-Mo-Ti-Mo-” linear unit along the specific< 111> β,< 110> β, and< 100>
β directions, the cluster structures of α ″-martensite and ω-phase were constructed in …

Abstract Biocompatible β Ti–45Nb (wt%) alloys were subjected to different methods of
severe plastic deformation (SPD) in order to increase the mechanical strength without …

Mechanical properties, passivation behaviors and corrosion resistance of biomedical
Ti15Mo alloy with ultra-finer twins were investigated. Cyclic deformation was conducted to …

For this paper, studies of the microstructure as well as the mechanical and biological
properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) …

The effects of composition and cold groove-rolling on Young's modulus were investigated to
achieve low Young's modulus in β Ti–Nb–Sn ternary alloys for orthopedic applications …

A titanium alloy with 12 mass% molybdenum was produced using the cold crucible levitation
melting technique. By varying the process parameters, microstructures with and without Mo …

Phase transitions in α'-Ti martensite driven by high pressure torsion (HPT) as well as α'→ ω
transformations in Ti–Fe alloys were observed for the first time. The as cast alloys …