The dissimilar material joining of aluminum and titanium alloys is recognized as a challenge
due to the significant differences in the physical, chemical, and metallurgical properties of …

This article provides a comprehensive review of the advancements made in the diffusion
bonding of titanium and its alloys to other advanced materials such as aluminium, stainless …

Abstract Hybrid Additive Manufacturing (HAM) is a production strategy enhancing the
flexibility of the already versatile Additive Manufacturing (AM) techniques. AM of Ti6Al4V, on …

Thermal spray assisted transient liquid phase (TLP) bonding of Ti− 6Al− 4V to Al2024 alloys
was investigated, where the interlayer was 80 µm Babbitt thermal spray coat on Al substrate …

This paper investigated the thermal stress distribution in laser welding of Ti6Al4V and 2024-
T4 alloys using the coupled thermal–mechanical model based on the thermo-elastoplastic …

Thermal spray is a critical and widely used surface engineering technique that forms a
protective and relatively rough coating on a substrate by spraying small, high-velocity …

This research investigates the diffusion bonding of hybrid aluminum (Al)–titanium (Ti) joints
using a copper (Cu) interlayer in a vacuum environment. At 610° C and 1 MPa pressure …

The objective of this study is to investigate the effect of bonding temperature on the
microstructure and mechanical properties of Al2024 and Ti-6Al-4V diffusion bonds using a …

In this study, eighteen different states of acid etching, totally 99 test pieces were examined,
including acid type, acid etching temperature, and acid etching time. Surface …

The transient liquid phase bonding of titanium and aluminum alloys was investigated, in
which the interlayer was a 30-µm-thick brass foil and pure silver foil. The optimized variables …