In this study, cutting forces and chip shapes formed by turning cylindrical materials were
researched experimentally and numerically. AISI 4340 steel alloy with a hardness of about …

The study presents the machinability of Nimonic 80A superalloys depending on the cutting
forces in both the turning experiments and simulations by finite element method (FEM) in …

In this work, effect of machining parameters cutting speed, feed rate and depth of cut,
geometrical parameters cutting insert shape, relief angle and nose radius were investigated …

In this present work, finite element analysis (FEA)‐based simulation of end‐milling of
AISI1045 steel using tungsten carbide tool was performed using DEFORM‐3D simulation …

Traditional metal removal process such as 'turning'utilizes a hardened cutting tool to remove
unwanted material from the rotating workpiece to obtain the desired shape. During the …

Optimization of machining parameters considering multiple responses flank wear, surface
roughness, and material removal rate (MRR) simultaneously are performed using response …

The technique of polymer grouting is frequently used in underground projects. The life span
of the grouted body needs to be evaluated carefully to guarantee the long-term performance …

In metal machining, a large amount of heat is generated which significantly affects the
machining performance, and therefore, a suitable cooling/lubricating strategy is required to …

This paper focuses on the experimental investigation of machining parameters such as
cutting speed, feed rate and depth of cut influence over surface roughness parameters (Ra …

Design of Experiments (DoE) is a powerful guiding tool that can help researchers to identify
the main variables that affect the performance characteristics. The present paper elaborates …