The effect of chemical composition on the structure, chemistry and mechanical properties of magnetron sputtered WBC coatings: Modeling and experiments
Ternary WBC coatings were non-reactively deposited in order to enhance the envelope of
the mechanical properties of the binary transition metal borides and carbides with a focus on …
the mechanical properties of the binary transition metal borides and carbides with a focus on …
Evolution of structure and mechanical properties of hard yet fracture resistant W‐B‐C coatings with varying C/W ratio
Preparation of coatings simultaneously exhibiting high hardness and enhanced fracture
resistance is a hot topic, as nowadays used ceramic protective coatings show difficulties to …
resistance is a hot topic, as nowadays used ceramic protective coatings show difficulties to …
Phase formation, thermal stability and mechanical properties of Nb-BC coatings prepared by combinatorial magnetron sputtering
In this study, combinatorial magnetron sputtering was used to deposit Nb-BC coatings in a
wide composition range. The phase formation, thermal stability and mechanical properties of …
wide composition range. The phase formation, thermal stability and mechanical properties of …
[HTML][HTML] Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experiment
J Ženíšek, P Souček, P Ondračka, Z Czigány… - Acta Materialia, 2024 - Elsevier
This article presents theoretical and experimental findings on the stability of orthorhombic
(Mo 1− x Nb x) 2 BC phase in magnetron sputtered coatings, where molybdenum is …
(Mo 1− x Nb x) 2 BC phase in magnetron sputtered coatings, where molybdenum is …
Synthesis and characterization of Ta–B–C coatings prepared by DCMS and HiPIMS co-sputtering
This study reports on the deposition and properties of Ta–B–C coatings by the co-sputtering
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
of tantalum, boron carbide, and graphite targets using High Power Impulse Magnetron …
W 4f electron binding energies in amorphous WBC systems
In this paper, we critically evaluate the applicability of the procedure proposed in [Mirzaei et
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
al., Surf. Coat. Technol. 358 (2019) 843–849] which is based on the fitting of the XPS …
Effect of bonding structure on hardness and fracture resistance of WBC coatings with varying B/W ratio
Low ductility and brittle deformation behaviors are major drawbacks of currently used
commercial hard ceramic-based protective coatings. Recent ab-initio calculations revealed …
commercial hard ceramic-based protective coatings. Recent ab-initio calculations revealed …
Thermal stability of nanocrystalline surface layer of AISI 321 stainless steel
A nanocrystalline layer with an average grain size of 75 nm was formed on the top surface
layer of 321 stainless steel (321SS) alloy via severe shot peening (SSP). Grazing incidence …
layer of 321 stainless steel (321SS) alloy via severe shot peening (SSP). Grazing incidence …
Structural, morphological, and optical characterizations of Mo, CrN and Mo: CrN sputtered coatings for potential solar selective applications
Abstract Mo, CrN, and Mo: CrN sputtered coatings synthesized onto silicon Si (100)
substrates were investigated as solar selective surfaces and their potential applications in …
substrates were investigated as solar selective surfaces and their potential applications in …
Tribological behaviors of Mo2BC ceramics against various counterpart materials
In this study, the tribological behaviors of Mo 2 BC ceramics against four different
counterpart materials were studied. It was established that the tribological properties of Mo 2 …
counterpart materials were studied. It was established that the tribological properties of Mo 2 …