[HTML][HTML] Outstanding strengthening behavior and dynamic mechanical properties of in-situ Al–Al3Ni composites by Cu addition
The microstructure, mechanical properties, and dynamic mechanical properties of the
various intermetallic-reinforced in-situ Al–Al 3 Ni eutectic composites were investigated for …
various intermetallic-reinforced in-situ Al–Al 3 Ni eutectic composites were investigated for …
Viscoelastic behavior of a novel aluminum metal matrix composite and comparison with pure aluminum, aluminum alloys, and a composite made of Al–Mg–Si alloy …
The viscoelastic response of a novel composite (A356 aluminum alloy matrix with ceramic
reinforcement particles developed from colliery shale waste) is measured with dynamic …
reinforcement particles developed from colliery shale waste) is measured with dynamic …
Dynamic microstructural evolution of an Al–Zn–Mg–Cu alloy (7075) during continuous heating and the influence on the viscoelastic response
The microstructural evolution of an Al–Zn–Mg–Cu alloy under continuous heating over the
temperature range of 298 to 648 K (25 to 375° C) is characterized by focused ion beam …
temperature range of 298 to 648 K (25 to 375° C) is characterized by focused ion beam …
Modeling of the effect of temperature, frequency, and phase transformations on the viscoelastic properties of AA 7075-T6 and AA 2024-T3 aluminum alloys
The viscoelastic response of commercial aluminum alloys 7075-T6 and 2024-T3 as a
function of temperature is presented. Experimental data are obtained with a dynamic …
function of temperature is presented. Experimental data are obtained with a dynamic …
Onset frequency of fatigue effects in pure aluminum and 7075 (AlZnMg) and 2024 (AlCuMg) alloys
The viscoelastic response of pure Al and 7075 (AlZnMg) and 2024 (AlCuMg) alloys,
obtained with a dynamic-mechanical analyzer (DMA), is studied. The purpose is to identify …
obtained with a dynamic-mechanical analyzer (DMA), is studied. The purpose is to identify …
Study on Mechanical Relaxations of 7075 (Al–Zn–Mg) and 2024 (Al–Cu–Mg) Alloys by Application of the Time‐Temperature Superposition Principle
The viscoelastic response of commercial Al–Zn–Mg and Al–Cu–Mg alloys was measured
with a dynamic‐mechanical analyzer (DMA) as a function of the temperature (from 30 to …
with a dynamic‐mechanical analyzer (DMA) as a function of the temperature (from 30 to …
Effect of Temperature and Frequency on the Viscoelastic Behavior of Commercial 6082 (Al–Mg–Si) Alloy
The viscoelastic response of pure Al and commercial 6082 and 6082-T6 (Al–Mg–Si) alloys
is measured with dynamic–mechanical analyzer as a function of temperature (ranging from …
is measured with dynamic–mechanical analyzer as a function of temperature (ranging from …
[PDF][PDF] The role of the matrix in SiC reinforced composites
M Madej, B Leszczyńska-Madej… - … Theory and Practice, 2023 - kompozyty.ptmk.net
This article presents a comparison of the properties of composites based on aluminum or
aluminum alloy (Al4Cu) reinforced with silicon carbide SiCp. The main objective was to …
aluminum alloy (Al4Cu) reinforced with silicon carbide SiCp. The main objective was to …
Vibration and Aeroelastic Prediction of Multi-Material Structures based on 3D-Printed Viscoelastic Polymers
JB Carter - 2021 - search.proquest.com
The design of structures requires an accurate characterization of their material properties.
Recent fabrication technologies such as Fused Deposition Modeling (FDM) 3D printing …
Recent fabrication technologies such as Fused Deposition Modeling (FDM) 3D printing …
CARÁCTER VISCOELÁSTICO DEL ALUMINIO AA6061 POR EFECTO DE LA TEMPERATURA Y LA MICROESTRUCTURA, CARACTERIZADO POR RESISTIVIDAD …
JLM Ochoa, ARP Arias - La Revista Latinoamericana de …, 2017 - search.ebscohost.com
La acción de la temperatura generó transformaciones de fase en el aluminio AA6061 que
provocaron deformación y relajación en la microestructura. Estos efectos han sido …
provocaron deformación y relajación en la microestructura. Estos efectos han sido …