With the progress of medical and health undertakings as well as the continuous deepening
of attention to dental health, the dental implant has received extensive attention. It is an …

In this work, we present experimental data on the structure, chemical composition and wear
resistance of a titanium alloy Ti6Al4V after pulsed laser treatment. The material was …

Laser induced periodic surface structures were generated in a single step by applying
picosecond laser irradiation at different repetition rates on a surface area of 15× 15 mm 2 of …

Herein we report the results of multi-element nitride and intermetallic coatings obtained by
the arc-PVD method based on non-trivial elements combinations (Nb-75.5, Si-9.65, Cu …

The requirements that complex 3D miniaturised components have to satisfy are constantly
increasing for various application areas, eg in aerospace, biomedical and electronics, and …

Laser processing of dental implant surfaces is becoming a more widespread replacement
for classical techniques due to its undeniable advantages, including control of oxide …

In this study, the modification of personalized titanium implants was developed using the
plasma electrolytic oxidation process. Plasma electrolytic oxidation process parameters …

Laser-induced periodic surface structures (LIPSS) is the sub-wavelength periodic
nanostructure, which is generally generated by the femtosecond laser. There are two kinds …

Laser texturing seems to be a promising technique for reducing bacterial adhesion on
titanium implant surfaces. This work aims to demonstrate the possibility of obtaining a …

Dental and orthopedic implants have become routine medical technologies for tooth
replacement and bone fixation. Despite significant progress in implantology, achieving …