Electroplating for decorative applications: Recent trends in research and development
Electroplating processes are widely employed in industrial environments for a large variety
of metallic coatings, ranging from technological to decorative applications. Even if the …
of metallic coatings, ranging from technological to decorative applications. Even if the …
On the thermodynamics and its connection to structure in the Pt-Pd-Cu-Ni-P bulk metallic glass forming system
Contrary to basic hard sphere structure models, recent studies revealed, significant
structural differences between Pt-Cu-Ni-P and Pd-Cu-Ni-P metallic glass-forming liquids …
structural differences between Pt-Cu-Ni-P and Pd-Cu-Ni-P metallic glass-forming liquids …
[HTML][HTML] CALPHAD-enabled design of metallic glasses with target properties: Gold-based glass for jewellery
The compositions of current metallic glasses are designed to ensure glass formation, and
they can be far from optimal for intended applications. The composition changes needed to …
they can be far from optimal for intended applications. The composition changes needed to …
On the thermodynamics, kinetics, and sub-Tg relaxations of Mg-based bulk metallic glasses
The four Mg-based bulk metallic glass forming alloys Mg 59.5 Cu 22.9 Ag 6.6 Gd 11, Mg 61
Cu 28 Gd 11, Mg 54 Cu 28 Ag 7 Y 11, and Mg 65 Cu 25 Y 10 are investigated to gain insight …
Cu 28 Gd 11, Mg 54 Cu 28 Ag 7 Y 11, and Mg 65 Cu 25 Y 10 are investigated to gain insight …
[HTML][HTML] In-situ TEM study of the crystallization sequence in a gold-based metallic glass
YP Ivanov, CM Meylan, NT Panagiotopoulos… - Acta Materialia, 2020 - Elsevier
Abstract The composition Au 49 Ag 5.5 Pd 2.3 Cu 26.9 Si 16.3 (at.%) is of interest as the
basis for the development of gold-based bulk metallic glasses for application in jewellery. In …
basis for the development of gold-based bulk metallic glasses for application in jewellery. In …
The role of Ga addition on the thermodynamics, kinetics, and tarnishing properties of the Au-Ag-Pd-Cu-Si bulk metallic glass forming system
Effective strategies to improve the tarnishing resistance of the 18 K (karat) gold-based bulk
glass-forming composition Au 49 Ag 5.5 Pd 2.3 Cu 26.9 Si 16.3 were recently found, with the …
glass-forming composition Au 49 Ag 5.5 Pd 2.3 Cu 26.9 Si 16.3 were recently found, with the …
[HTML][HTML] Development and optimization of novel sulfur-containing Ti-based bulk metallic glasses and the correlation between primarily crystallizing phases, thermal …
The effect of sulfur on the glass forming ability, thermal stability and mechanical properties of
the eutectic alloy Ti 33.4 Zr 33.3 Cu 33.3 was investigated by conventional X-ray diffraction …
the eutectic alloy Ti 33.4 Zr 33.3 Cu 33.3 was investigated by conventional X-ray diffraction …
[HTML][HTML] Pd-and Zr-based bulk metallic glasses for jewellery applications: scratch, wear and tarnish behaviour
For application in luxury goods, attractive features of bulk metallic glasses include good
surface finish, high hardness and thermoplastic formability. Concerns include their scratch …
surface finish, high hardness and thermoplastic formability. Concerns include their scratch …
Bulk metallic glass formation in the (Ti, Zr)–(Ni, Cu)–S system
New bulk glass-forming alloy compositions, exceeding a critical casting thickness of 1 mm,
are developed in the (quasi-ternary)(Ti, Zr)–(Ni, Cu)–S system. The ternary eutectic …
are developed in the (quasi-ternary)(Ti, Zr)–(Ni, Cu)–S system. The ternary eutectic …
[HTML][HTML] Compositional tuning-induced permanent color adjustment and mechanical properties: binary Cu-Mg colored metallic system
Cu-Mg binary alloys consist of a relatively simple mixture of eutectic reactions (L➔ fcc Cu+
MgCu 2). Since they have different color, ie, the copper with L*= 86, a*= 14, b*= 16 and the …
MgCu 2). Since they have different color, ie, the copper with L*= 86, a*= 14, b*= 16 and the …