Dust and powder in fusion plasmas: Recent developments in theory, modeling, and experiments
S Ratynskaia, A Bortolon, SI Krasheninnikov - Reviews of Modern Plasma …, 2022 - Springer
In this paper, we present a brief historic overview of the research on dust in fusion devices
with carbon plasma-facing components and then highlight the most recent developments in …
with carbon plasma-facing components and then highlight the most recent developments in …
Physics and technology considerations for the deuterium–tritium fuel cycle and conditions for tritium fuel self sufficiency
The tritium aspects of the DT fuel cycle embody some of the most challenging feasibility and
attractiveness issues in the development of fusion systems. The review and analyses in this …
attractiveness issues in the development of fusion systems. The review and analyses in this …
Filamentary plasma eruptions and their control on the route to fusion energy
The tokamak is the most advanced approach to fusion and is approaching operation under
power-plant conditions, promising sustainable, low-emission, baseload power to the grid. As …
power-plant conditions, promising sustainable, low-emission, baseload power to the grid. As …
The JOREK non-linear extended MHD code and applications to large-scale instabilities and their control in magnetically confined fusion plasmas
JOREK is a massively parallel fully implicit non-linear extended magneto-hydrodynamic
(MHD) code for realistic tokamak X-point plasmas. It has become a widely used versatile …
(MHD) code for realistic tokamak X-point plasmas. It has become a widely used versatile …
Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism
A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs)
in fusion plasmas is identified by performing, for the first time, non-linear …
in fusion plasmas is identified by performing, for the first time, non-linear …
Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks
A 3D numerical model for the ablation of pellets and shattered pellet injection fragments in
tokamaks in the plasma disruption mitigation and fueling parameter space has been …
tokamaks in the plasma disruption mitigation and fueling parameter space has been …
Integrated ELM and divertor power flux control using RMPs with low input torque in EAST in support of the ITER research plan
Experiments have been carried out at the EAST tokamak to study ITER-relevant scenario
integration issues, related to edge localized mode (ELM) control in H-mode plasmas by the …
integration issues, related to edge localized mode (ELM) control in H-mode plasmas by the …
3D non-linear MHD simulation of the MHD response and density increase as a result of shattered pellet injection
D Hu, E Nardon, M Lehnen, GTA Huijsmans… - Nuclear …, 2018 - iopscience.iop.org
The MHD response and the penetration of a deuterium shattered pellet into a JET plasma is
investigated via the non-linear reduced MHD code JOREK with the neutral gas shielding …
investigated via the non-linear reduced MHD code JOREK with the neutral gas shielding …
High frequency pacing of edge localized modes by injection of lithium granules in DIII-D H-mode discharges
A Bortolon, R Maingi, DK Mansfield, A Nagy… - Nuclear …, 2016 - iopscience.iop.org
A newly installed Lithium Granule Injector (LGI) was used to pace edge localized modes
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
Collisional-radiative simulation of impurity assimilation, radiative collapse and MHD dynamics after ITER shattered pellet injection
Recent studies suggest significant time delay between the Shattered Pellet Injection (SPI)
fragment arrival and the temperature radiative collapse could exist in ITER, depending on …
fragment arrival and the temperature radiative collapse could exist in ITER, depending on …