Abstract Although Ti–6Al–4V alloy has wide applications in marine and chemical industries,
its application is highly limited in corrosive environment such as sulphuric acid. This is due …

The γ/γ′ two-phase Co–Al–V-base superalloys are investigated in detail, including their
phase equilibria, alloying effects, and alloy design. The experimental proof of the existence …

In Part I, various models for the prediction of the occurrence and stability of Laves phases
have been discussed. In the present Part II paper, an overview is given on the various types …

The CALPHAD technique is a powerful tool for materials processing and alloy design. The
quality of CALPHAD-type calculations is strongly dependent on the quality of the …

Herein, a novel refractory Nb30Mo30Ti20Co20 (at.%) high-entropy superalloy (RHESA) is
introduced. Annealing at 1200° C led to the precipitation of a semi-coherent individual (Co …

The influences of alloying elements Al and Ni to a Co-Ti-V master alloy on microstructures,
phase stabilities and high-temperature mechanical properties have been investigated. A two …

WC–Co cemented carbide/steel brazed at low–temperature is of significant scientific and
technical interest. In this study, the interface microstructure between the filler alloy and WC …

The effects of the relative content of Al and Ti, and the addition of 2 at.% Cr or Mo to partly
substitute Co on the microstructure and mechanical properties of Co–Ni–Al–Ti superalloy …

Abstract Continuous turning of Ti6Al4V with uncoated WC-Co cutting tool inserts mainly
results in crater wear on the rake face of the tool. The crater is located close to the cutting …

The phase transformation temperatures of the Ti–Sn system at Sn-rich portion are
determined by DTA. The optimized descriptions of the phase diagram and thermodynamic …