Autogenous laser-welded dissimilar joint of ferritic/martensitic P92 steel and Inconel 617 alloy: Mechanism, microstructure, and mechanical properties
Dissimilar autogenous welding of ferritic/martensitic P92 steel and Inconel 617 alloy was
conducted using the laser beam-welding process. The microstructure evolution such as …
conducted using the laser beam-welding process. The microstructure evolution such as …
Study on microstructural characterization, mechanical properties and residual stress of gtaw dissimilar joints of p91 and p22 steels
This article deals with the dissimilar joining of two different grade Cr-Mo steel (2.25 Cr-1Mo:
P22 and modified 9Cr-1Mo: P91) for power plant application. The dissimilar butt-welded …
P22 and modified 9Cr-1Mo: P91) for power plant application. The dissimilar butt-welded …
Experimental and numerical study on the distribution of temperature field and residual stress in a multi-pass welded tube joint of Inconel 617 alloy
The purpose of this study is to compare the residual stress generation during hot wire gas
tungsten arc welding (HW-GTAW) welding and conventional gas tungsten arc welding …
tungsten arc welding (HW-GTAW) welding and conventional gas tungsten arc welding …
Microstructure and mechanical behavior of P91 steel dissimilar welded joints made with IN718 filler
The paper presents the detailed microstructure study and mechanical behavior of P91
welded joint produced by gas tungsten arc welding process (GTAW) using the dissimilar …
welded joint produced by gas tungsten arc welding process (GTAW) using the dissimilar …
Metallurgical characterization and high-temperature tensile failure of Inconel 617 alloy welded by GTAW and SMAW—a comparative study
Two types of the weld joint of Inconel 617 alloy were produced using gas tungsten arc
welding (GTAW) and shielded metal arc welding (SMAW) processes with ERNiCrCoMo-1 …
welding (GTAW) and shielded metal arc welding (SMAW) processes with ERNiCrCoMo-1 …
High-temperature strengthening mechanism and thermal stability of Laves phase in ferritic matrix
T Ruan, J Shen, B Li, Z Zhao, D Zhang - Materials Science and …, 2022 - Elsevier
The high-temperature creep strengthening mechanism and thermal stability of Laves phase
are the key factors that affect its strengthening property in ferritic matrix. Therefore, in this …
are the key factors that affect its strengthening property in ferritic matrix. Therefore, in this …
Dissimilar autogenous TIG joint of Alloy 617 and AISI 304H steel for AUSC application
To reduce costs and improve high-temperature performance in Advanced Ultra Super
Critical (AUSC) boilers, it is necessary to weld austenitic steel to Inconel alloy. In this study …
Critical (AUSC) boilers, it is necessary to weld austenitic steel to Inconel alloy. In this study …
Investigation of microstructure, mechanical and corrosion properties of GMAW of dissimilar P91-HP alloy V-butt groove joint
In this study, dissimilar metals HP iron-based nickel alloy and P91 creep resistant steel are
welded with gas metal arc welding (GMAW) and microstructural, mechanical and corrosion …
welded with gas metal arc welding (GMAW) and microstructural, mechanical and corrosion …
A comparative study of erosion wear rate of conventional and nonconventional thermal barrier coatings on IN800 superalloys
D Kumar, K Npandey - Sādhanā, 2021 - Springer
Air plasma sprayed (APS) 7weight percent yttria stabilized zirconia (7YSZ) typical thermal
barrier coatings are commonly used in aero engine components to protect against thermal …
barrier coatings are commonly used in aero engine components to protect against thermal …
Characterization of microstructure and mechanical properties of Cr-Mo Grade P22/P91 steel dissimilar welds for supercritical power plant application
In supercritical thermal power plant units, a dissimilar joining of heat-resistant Cr-Mo steels
such as P91 and P22 is commonly employed for components like boiler headers, piping …
such as P91 and P22 is commonly employed for components like boiler headers, piping …