In this article, we summarize what we have learned about metal-as-insulation (MI) winding
behavior and technical challenges. High-temperature superconductor (HTS) materials are …

A 38 mm diameter cold bore High Temperature Superconducting solenoidal insert was
designed, constructed and tested by a collaborative team of CEA-CNRS researchers. With a …

The shielding (or screening current) effect in high-T c coated conductors has a strong
influence on its stress/strain distribution in a coil winding, especially during high-field …

High-temperature superconducting coated conductors (CCs) are considered an enabling
ultra-high field (UHF) tape-conductor technology due to their extremely high engineering …

REBCO high-temperature superconductors are promising for all-superconducting high-field
magnets, including ultra-high field magnets. Non-insulated (NI) and metal-insulated (MI) …

Although all the commercial REBCO tapes claim the stabilizer layer is pure Cu, the turn-to-
turn contact resistance of coils wound from conductors sourced from different manufacturers …

REBa2Cu3O7-x (REBCO) coated conductor has emerged as a promising material for the
development of ultra-high-field (UHF) magnets. However, the presence of screening-current …

The effect of the 304 stainless steel (SS)-coated layer on the electrical and thermal
properties in the radial direction of REBCO commercial tape was systematically investigated …

A higher available magnetic field can provide more flexibility for significant research and
construction. Inserting a feasible high-temperature-superconducting (HTS) magnet inside a …

This paper presents the construction and the test results of a metal-as-insulation (MI) HTS
mock-up insert for a 10 T HTS insert. Two MI double pancake (DP) coils were fabricated …