As a non-beam-based additive manufacturing (AM) method, binder jet 3D printing (BJ3DP)
is a process in which a liquid binder is jetted on layers of powdered materials, selectively …

Binder Jet printing is an additive manufacturing technique that dispenses liquid binding
agent on powder to form a two-dimensional pattern on a layer. The layers are stacked to …

The amalgamation of 3D extrusion printing (3DEP) and sintering results in a low-cost
process compared to other laser-based additive manufacturing techniques. This work used …

In this study, the influence of sintering temperature and hold time on densification,
mechanical properties, and microstructural characteristics of 17–4 PH stainless steel …

In binder jetting (BJT) additive manufacturing (AM), jetted liquid binder binds powder
particles and provides structural integrity to the printed green parts. Following printing, the …

Purpose This paper aims to provide a comparison between the mechanical performance
and microstructural aspects of stainless steel 17-4 PH processed using, respectively, two …

Efficient density evolution during sintering of the as-printed component is vital to reach full
densification and required properties of binder jet (BJT) components. However, due to the …

This research investigates the impact of heat treatment on the microstructure, hardness, and
corrosion resistance of 17-4 PH SS (stainless steel) processed by Selective Laser …

Green density of binder jetted parts are typically equal or lower than the powder tap density.
Also, anisotropic green porosity distribution is expected because of the characteristics of the …

The most relevant criticalities of parts produced by material extrusion additive manufacturing
technologies are lower mechanical properties than standard material performances, the …