The wake of a square cylinder is investigated for Reynolds number Re< 10 7. Two-
dimensional (2D) laminar simulation and three-dimensional (3D) large-eddy simulation are …

The wind field around a 1: 1: 2 isolated building was predicted by large-eddy simulation for
evaluating the pedestrian-level wind environment. This study focused on the effects of cell …

The paper presents the numerical results of the transverse flow around an infinite square
beam based on the two-fluid turbulence model for the Reynolds number Re= 21400. This …

Scientific research and engineering practice often require the modeling and decomposition
of nonlinear systems. The dynamic mode decomposition (DMD) is a novel Koopman-based …

This paper presents a fast incompressible SPH (ISPH) solver implemented to run entirely on
a graphics processing unit (GPU) capable of simulating several millions of particles in three …

This paper presents an extensive review of existing techniques used in estimating design
wind pressures considering Reynolds number and turbulence effects, as well as a case …

This study topologically describes near-wall flows around a surface-mounted cylinder at a
high Reynolds number (. The former should significantly affect the strength of the side vortex …

In the past, the coarse spanwise resolution was widely used for high-Reynolds-number flow
simulations of a two-dimensional bluff body with the purpose of reducing the computational …

A lean premixed propane/air bluff-body stabilized flame (Volvo test rig) is calculated using
the Scale-Adaptive Simulation turbulence model (SAS) and Large-Eddy simulations (LES) …

Three-dimensional large eddy simulations were carried out to investigate the flow over two
tandem square cylinders for a fixed spacing ratio of L/D= 4 and a Reynolds number of 5.3× …