In this study, nitrogen and argon were used as the sintering atmosphere for AISI 316L
stainless steel compacts. The effects of sintering atmosphere on sintered density, grain …

Al–Al2O3 nanostructured composite powders containing 1, 3 and 7 percent volume fraction
(vf%) of submicron/nanometeric alumina particles as reinforcement phase were produced by …

The work evaluates the effect of heating rate in microwave sintering, and the effect of particle
size of 316L powders in microwave and conventional sintering processes. The powders of …

PM 304L and 316L stainless steel have been compacted at 400, 600 and 800MPa and
sintered in vacuum and in nitrogen–hydrogen atmosphere. Postsintered heat treatments …

Here we report the effects of nano-Y 2 O 3 addition, sintering atmosphere and time during on
the fabrication of PM duplex and ferritic stainless steels composites by dual-drive planetary …

In this study, steel matrix composites were fabricated using 316L/polycarbosilane (PCS)
system via a novel semi powder metallurgy method including solution-assisted wet mixing …

Two types of ferritic stainless steel powders (AISI 409LNb and 434L) have been sintered in
vacuum at three different temperatures (1225, 1250 and 1275° C). The corrosion behaviour …

Steel-8TiB 2 composites were produced by two new sintering techniques, ie Spark Plasma
Sintering (SPS) and High Pressure-High Temperature (HP-HT) sintering. This study …

The nonlubricated sliding wear behavior of nano-yttria-dispersed and yttria-free duplex and
ferritic stainless steel against a diamond tip was studied. The stainless steel samples were …

Powder compaction and sintering are critical stages of powder metallurgy in manufacturing
high performance particle reinforced metal matrix composites. In this paper, particulate scale …