The review summarizes high-energy processing techniques applied for additive
manufacturing and surface engineering of cemented carbides and cermets, including laser …

Using scanning and transmission electron microscopy, X-ray diffraction, indentation and
bending tests we studied the evolution of microstructure, phase composition and mechanical …

Improving the comprehensive mechanical properties of the surface of 5CrNiMo mold steel
and prolonging the service life of the mold are important tasks of mold development. Hence …

Using scanning and transmission electron microscopy, X-ray diffraction, profilometry,
indentation and friction tests we investigated the microstructure and phase composition …

One of the features that appears on the pre-polished surface of metals and alloys as a result
of processing with low-energy high-current electron beam is a bump surface relief with the …

Using X-ray diffraction, scanning and transmission electron microscopy we studied the
evolution of the morphology, microstructure and phase composition in the near-surface layer …

Abstract Herein, the γ (Ni)/γ'(Ni 3 Al) duplex phase binders were introduced into the Ti (C, N)-
based cermets, with their wear behaviors studied and compared to the ones incorporating γ …

High-current pulsed electron beam (HCPEB) treatment significantly enhances the wear
resistance of WC-Co cemented carbide impact needles under high-frequency and micro …

In this study, Cr 3 C 2/Ni 3 Al composites containing Cr 3 C 2 particles of different sizes were
prepared via hot-press sintering. Subsequently, the effects of the size of the added Cr 3 C 2 …

Improving the service life and efficiency of high-speed steel (HSS) tools remains a
formidable challenge. Herein, scanning electron beam (SEB) was employed to modify the …