The possibilities for manufacturing metal foams or other porous metallic structures are
reviewed. The various manufacturing processes are classified according to the state of …

Porous metals have been under development for nearly a century, but commercial adoption
remains limited. This development has followed two primary routes: liquid state or solid state …

This study is concerned with the understanding and modeling of the compressive response
of open cell foams. The response starts with a nearly linear elastic regime which terminates …

Open cell, stochastic nickel foams are widely used for the electrodes and current collectors
of metal–metal hydride batteries. Closed cell, periodic aluminum honeycomb is extensively …

Green hydrogen is a valuable energy source able to overcome the environmental issues
generated by fossil fuel consumption. In this regard, large-scale production of green …

US PATENT DOCUMENTS 4,086,404 A 4, 1978 Vissers et al. 4,957,543 A 9/1990 Babjak et
al. 5,374,491 A 12, 1994 Brannan et al. 5,738,907 A 4, 1998 Vaccaro et al. RE35, 818 E 6 …

2,694,647 A 11, 1954 Cole 3,502,493 A 3, 1970 Forestek 3,694,325 A* 9, 1972 Katz et
al..................... 205.75 3,711,279 A 1/1973 Hivert et al. 3,753,757 A 8/1973 Rodgers et al …

Open cell periodic metal truss structures can exhibit significantly higher stiffnesses and
strengths than stochastic cellular metal structures of the same relative density while still …

HOLM 4/505(2010.01) ranges from about 0.05 to about 0.25, C. ranges from about 0.1
HOLM 4/525(2010.01) to about 0.4, B ranges from about 0.4 to about 0.65, and Y (52) US …

In this paper, the capability of the CVD technique to produce uniform foams of different
properties, with cell size ranging from∼ 450 to∼ 3200 μm, porosity from∼ 70 to∼ 98%, and …