A General Synthesis of Soft Magnetic 2: 17‐Type Rare‐Earth Cobalt Nanoalloys Decorated with Graphite as High‐Frequency Electromagnetic Materials

J Ma, Z Li, H Tian, B Yang, Y Yuan… - Advanced Functional …, 2024 - Wiley Online Library
A general approach is reported to fabricate a series of single‐phase 2: 17‐type rare‐earth
cobalt (RE2Co17, RE= Y, Ce, Pr, Nd, and Gd) nanoalloys by precisely controlled calcium …

Synthesis and Ex-Situ characterizations of diamond-like carbon coatings for metallic bipolar plates in PEM fuel cells

I Alaefour, S Shahgaldi, J Zhao, X Li - International Journal of Hydrogen …, 2021 - Elsevier
Metallic bipolar plates can significantly increase the power density of polymer electrolyte
membrane fuel cells; however, they require corrosion-protection coatings with desirable …

Diamond-like carbon thin films with high density and low internal stress deposited by coupling DC/RF magnetron sputtering

L Liu, T Wang, J Huang, Z He, Y Yi, K Du - Diamond and Related Materials, 2016 - Elsevier
Diamond like carbon films (DLC) with high density and low internal stress are urgent
demand for inertial confinement fusion (ICF) experiments. DLC films were deposited on Si …

Functional diamond like carbon (DLC) coatings on polymer for improved gas barrier performance

SC Ray, D Mukherjee, S Sarma, G Bhattacharya… - Diamond and Related …, 2017 - Elsevier
We have studied the optimum deposition conditions for the improvement of oxygen and
carbon dioxide gas barrier performance of functional diamond-like carbon (DLC) thin films …

Effect of graphite target power density on tribological properties of graphite-like carbon films

D Dong, B Jiang, H Li, Y Du, C Yang - Applied Surface Science, 2018 - Elsevier
In order to improve the tribological performance, a series of graphite-like carbon (GLC) films
with different graphite target power densities were prepared by magnetron sputtering. The …

Laser surface texturing to realize micro-grids on DLC coating: effect of marking speed, power, and loop cycle

L Giorleo, L Montesano, GM La Vecchia - International Journal of Precision …, 2021 - Springer
In the present study, laser surface texturing was tested with the aim of improving the
tribological properties of a diamond-like carbon (DLC) coating. Two experimental …

[HTML][HTML] Understanding the DLC film–Polyamide 12 substrate interrelation during pulsed laser deposition

A Niemczyk, D Moszynski, A Goszczyńska… - Applied Surface …, 2022 - Elsevier
High-quality hydrogen-free diamond-like carbon (DLC) films that are free of any detectable
signs of cracks and delamination are produced on polyamide 12 (PA) substrates using the …

Combining the good tribological properties with the high adhesion strength of the amorphous carbon films in situ grown on PI

Y Wu, Y Wang, Y Li - Frontiers in Materials, 2023 - frontiersin.org
Polyimide (PI) is widely utilized in the modern industry because of its excellent heat
resistance, dielectric properties, radiation resistance and chemical stability. However, PI will …

Fabrication and characterization of optical, mechanical and chemical properties of diamond-like carbon thin film deposited on polymer substrate

A Eshaghi, M Salehi - Optical and Quantum Electronics, 2018 - Springer
In this research, diamond-like carbon (DLC) thin films were deposited on polycarbonate
(PC) substrates by a RF plasma-enhanced chemical vapor deposition method. Before film …

Infrared and mechanical properties of the oxygen-doped non-hydrogenated diamond-like carbon film prepared by pulsed laser deposition

Y Cheng, Y Lu, G Huang, Y Guo, L Xi, S Wang… - Infrared Physics & …, 2019 - Elsevier
The non-hydrogenated diamond-like carbon films were prepared by the femtosecond laser
in the oxygen atmosphere, and the influence of the oxygen atmosphere on the …